No you have a hardware problem. The first place to start is to monitor your cpu temps while doing a conversion to see if it is going high--over 95c--if high temps then clean and use new heat compound for your cpu cooler. if it is not a cpu temp problem then the next will be reseating and moving around your memory simms.
In my experience as a Field engineer a over heating cpu or a memory that needs reseating or a bad memory sim is the top possibles for causing your problem.
My bet is on the memory.
bernie
Quote:
Originally Posted by fengli
It is possible that the problem you mentioned, the rendering engine has changed, which may bring about a sudden high CPU ratio, which is enough to make the computer blue screen crash
|