Quote:
Originally Posted by Renate
|
I tested the loader but I get:
Code:
Sending 000ac0e100000000_7be49b72f9e43372_fhprg_asus_peek.bin 0%
End transfer returned error 12
I also tested the UART Serial-USB on a Raspberry Pi first to confirm it's working, then switched the 3,3v to 1,8v and tried it on the Leaf2. But I don't get any output.
This is how I wired it:
- TX > RX
- RX > TX
- Ground > Ground
Maybe the RX trace needs to be bridged somewhere first?
Should it give output while booting or only in EDL-mode?