MobileRead Forums - View Single Post - PW2 flashing system after eMMC replacement

eddie.t.h · 08-05-2022, 08:03 AM

You need to use a spray freezer. This must be done simultaneously with the attempt to start the device. If the u-boot starts quickly stop it with any key (of course, you must be connected by a serial port) and type the command "idme".

08-05-2022, 08:03 AM	#17
eddie.t.h Addict Posts: 201 Karma: 123456 Join Date: Jan 2018 Device: Too Much Kindle :-)	You need to use a spray freezer. This must be done simultaneously with the attempt to start the device. If the u-boot starts quickly stop it with any key (of course, you must be connected by a serial port) and type the command "idme".