Thread: PW2 flashing system after eMMC replacement
View Single Post
Old 07-26-2022, 12:41 PM   #5
trimen
Junior Member
trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'trimen knows the difference between 'who' and 'whom'
 
Posts: 7
Karma: 10052
Join Date: Jul 2022
Location: Prague
Device: PW4,5
Thank you for providing the archives.
However, it will need more digging around because there is a potential problem with diags kernel version.

I would like to know, what is variable "sec" in u-boot idme command. I set it to zero, but I cannot find what it's related to.



Code:
[    2.035511] mmc0: unrecognised EXT_CSD revision 8
[    2.040281] mmc0: error -22 whilst initialising MMC card
[    2.050390] Freeing init memory: 1036K
3.0.35-lab126 #1 Tue Sep 3 03:12:16 PDT 2013 armv7l
[    2.258350] emmc: I def:mmcpartinfo:vendor=unknown, host=mmc0, manufacturer_id=0x13:
[    2.296709] mmc0: unrecognised EXT_CSD revision 8
[    2.301440] mmc0: error -22 whilst initialising MMC card
[    2.399185] add wake up source irq 104
[    2.530019] emmc: I def:mmcpartinfo:vendor=unknown, host=mmc0, manufacturer_id=0x13:
[    2.559302] KERNEL: I pmic:fg battery init::mg config init successful
[    2.566926] max77696-battery max77696-battery.0: Voltage alert     3400mV ... 4260mV
[    2.575359] max77696-battery max77696-battery.0: SOC alert         (disabled)
[    2.591427] mmc0: unrecognised EXT_CSD revision 8
[    2.596156] mmc0: error -22 whilst initialising MMC card
[    3.507313] KERNEL: I pmic:fg battery id check::wario_battery_valid=1
trimen is offline   Reply With Quote