Quote:
Originally Posted by Toony
I used this old tutorial for the Kobo Mini eReader:
https://www.youtube.com/watch?v=73QGYk2q80M
Open the back of the Kobo Glo HD very carefully with a very thin blade or better a hard plastic card or your nails. Now you see this:
[Image violates Posting Guidelines for size - MODERATOR]
The original Card is a SanDisk 4GB Class 4 so it should only have about 6MB/s write, 17 MB/s read
I replaced it with a SanDisk 32GB Ultra Card that has 17MB/s write and about 36 MB/s read! I have the feeling that the Bookcovers in my collections load much faster now.
Basicly you need the free programms:
USB Image Tool
MiniTool Partition Wizard Free
- Insert the 4gb Kobo Glo Micro SD Into your PC
- Open USB Image Tool and press "-> Backup" ...save the file and wait
- Remove the 4gb Kobo Glo Micro SD from your PC
- Insert new card e.g. 32gb Micro SD
- Go into USB Image Tool and press "<- Restore" select the *.img file you created and wait
- Open MiniTool Partition Wizard Free
- Select the KOBOEReader(FAT32) Partition on the SD Card and rightklick it
- Select "extend" and move the slider all the way to the right
- Press OK and now on the top right of the MiniTool klick "Apply" ...wait
- Now put the NEW SD into your Kobo Glo HD and Hold the power Button until it starts!
Result:
[Image violates Posting Guidelines for size - MODERATOR] |
Whew! Just updated my Clara to 64GB. Your instructions were spot on. Thank you!
The worst part was getting the back off.