View Single Post
Old 04-08-2022, 03:44 AM   #14
CyberPaul
Groupie
CyberPaul can extract oil from cheeseCyberPaul can extract oil from cheeseCyberPaul can extract oil from cheeseCyberPaul can extract oil from cheeseCyberPaul can extract oil from cheeseCyberPaul can extract oil from cheeseCyberPaul can extract oil from cheeseCyberPaul can extract oil from cheese
 
CyberPaul's Avatar
 
Posts: 159
Karma: 1000
Join Date: Aug 2016
Device: Kindle Voyage - Tolino Vision 4 HD - Kobo Sage
I’ve just realized that there has been a a misunderstanding. My fault. I was referring to the Android external app called TestEink, not to the internal driver test within koreader.
The one mentioned in the guide here:
https://allesebook.de/anleitung/toli...b-root-980665/
Where the author recommend these settings:
Quote:
1. Choose a waveform mode: GLR16
2. Choose an update mode: FULL
3. Choose a wait mode: NOWAIT
4. Choose a monochrome fashion: NOMONOCHROME
5. Choose a hardware dither mode: DITHER_COLOR_Y4
6. Choose a software dither mode: Android_ARGB8888
7. Tap "Go to testing" and at least tap the screen again to flicker.
Leave the test environment with the virtual buttons of Button Savior.
So we were talking about two different things.
Anyway the above settings are very important in my case to get rid of ghosting. Unfortunately they are not saved: after Tolino is rebooted, I see ghosting until I don't re-do the above steps.
Aren't you using this in your cases? Aren't you experiencing ghosting without performing those steps?
I'm totally new to koreader that's why I'm asking if I'm making mistakes.
Thanks!

Last edited by CyberPaul; 04-08-2022 at 03:50 AM.
CyberPaul is offline   Reply With Quote