Quote:
Originally Posted by retval
For statistical purposes I use an i5-4460, 3.20GHz. 16gb ram. At 2 hours the windows 10 manager indicated a usage of 30% CPU, 50% Ram and 40° of temperature on the ssd. It could continue to work normally on the pc.
After 8 hours it occupied 100% of the CPU, 94% of the ram and 43° of heat. It could no longer work, as it consumed all the resources. Of the 4 cores of the processor only 2 were used and 1.5 gb of ram for ElacticSearch. Is this behavior normal?
|
CPU usage might fluctuate based on what files (and file types) are currently being converted. 94% of RAM sounds too much, but 36K of books is also a lot!
Quote:
Originally Posted by retval
The strange thing is that putting few books, about 20, and doing a search only in those selected books it searches the whole library, which is very slow. When cancelling it shows the results in the selected books. The logical thing is that the search on selected books does not use the whole library. I don't understand this.
|
Fair point, I will take a look, thanks.
Quote:
Originally Posted by retval
One suggestion is to have PowerSearch display a result that indicates how many times the search term is found in each book. This could perhaps be displayed in an additional column. Then we could see the books in which the search finds better results, at least quantitatively..
|
This might be not so easy to implement, but thanks for suggestion, I will think about it.