Thread
:
disable demo mode
View Single Post
12-01-2021, 04:46 AM
#
7
MrTick
Enhtusiast
Posts: 53
Karma: 2340139
Join Date: Dec 2018
Device: K3 DxG PW1 KV PW4
Quote:
Originally Posted by
lucas_nz
Hi,
I've finally managed to get connected to the serial port, but I get this slightly garbled output (see below). What could be causing this?
(...)
First please ensure you have a proper connection between the Kindle and serial adapter - at first glance you seem to have some kind of short between Rx and Tx or some problem with the GND connection (please also unplug the USB when using serial just to prevent some strange problems).
Also check if your serial adapter runs in 3.3V (ideally 1.8V, but they are sometimes hard to get), as 5V might be too much for the UART circurity.
MrTick
View Public Profile
Find More Posts by MrTick
Track Posts by MrTick via RSS