|
Hey Tezz, what Odyssey do you have? What is the model number?
Is this an odyssey Hd? With or without Front light?
One good way to recognise the firs gen odyssey from the second gen is the power button. A slide button is the first gen, a push one is for the later.
Do you have an SD card in the device? There has been time where it can make the reading software slow to start when an SD card is in, it’s a bizzare bug.
If you are sure the firmware update did work fine, try to boot the device with the USB cable connected and if it mount on your computer copy all of the data then put them back by small batch, the software may be unhappy with one of the books.
If none of that work, and your don’t mind formatting the internal storage,you can boot the device in factory mode, make sure it is switch off, then press the two left/right button, keep them pressed while booting the device, it should show a slightly different splash screen with “Service mode” displayed.
From there use the left/right page button to go up and down in the menu and the home button to validate.
Select “Device tools”, the “Internal Memory”, you should first run the “check internal memory”, then go up in the menu, and reboot.
If it still don’t work, go back and select “format”
If it still don’t work then we will go through another route.
Let’s try that first, and tell me what you get.
If the factory mode works on your device and you are not sure which model you have, go to “device info” at the root of the service menu and give me the info tout have there.
Also the latest official for Odyssey should be 6.2, the 5.2 is a pretty old one.
|