MobileRead Forums - View Single Post - PocketBook Basic 2 (PB614) unresponsive, always in FEL/flashing mode

nhedgehog · 09-23-2021, 03:59 AM

Gloves no. Unplugging the battery is recommended but only if possible.
If not possible:
Be careful that the screws are removed without letting them fall back on the board.
Avoid any metallic objects the can shortcircuit the board.
Next to the battery plug is the screen ribbon cable plug, which is hidden behind some tape. After everything is done make sure this plug is still well connected or plug it in again.
Avoid static charges, meaning touch a radiator or some other grounded metallic object before beginning to work on electronics.

09-23-2021, 03:59 AM	#15
nhedgehog Guru Posts: 802 Karma: 628976 Join Date: Sep 2013 Device: EnergySistemEreaderPro, Nook STG, Pocketbook 622, Bookeen Cybooks ...	Gloves no. Unplugging the battery is recommended but only if possible. If not possible: Be careful that the screws are removed without letting them fall back on the board. Avoid any metallic objects the can shortcircuit the board. Next to the battery plug is the screen ribbon cable plug, which is hidden behind some tape. After everything is done make sure this plug is still well connected or plug it in again. Avoid static charges, meaning touch a radiator or some other grounded metallic object before beginning to work on electronics. Last edited by nhedgehog; 09-23-2021 at 04:01 AM.