[RbnJrg]

After downloading the last beta, I did some tests.

First at all, my keyboard layout it can be seen in this post:

https://www.mobileread.com/forums/sh...6&postcount=26

I made tests with AltGr disabled and AltGr enabled. I also tested Ctrl + Shift combinations in both events. These are my results:

With AltGr disabled:

1. Ctrl + Shift + 6 is not right detected. It detects "Ctrl + ^" when it should detect "Ctrl + &"
   
2. Ctrl + Shift + ^ is not detected at all.
   
3. Ctrl + Shift + 0 is not detected at all. It should detect Ctrl + = but it doesn't.
   
4. "AltGr + 1" is detected as "Ctrl + Alt + |" but doesn't work. Nor "AltGr + 1" nor "Ctrl + Alt + 1". The same happens with all AltGr combinations; the chars are right detected but don't work.

With AltGr enabled:

1. Regarding the Ctrl+Shift combinations, the same issues that in the case with AltGr disabled.
2. "AltGr + 1" is detected as "|" but as shortcut, is not working (and it shouldn't because a char can't be a shortcut)
3. With AltGr enabled, in the Shortcut field is written only the respective character, but not something like "AltGr + |" or "AltGr + @" or "AltGr + #", etc., etc.

Conclusions: with my keyboard, the Ctrl + Shift combinations work fine, except in the case of Ctrl + Shift + 6, Ctrl + Shift + 0 and Ctrl + Shift + ^.
With AltGr disabled, the combinations are right detected, but don't work. With AltGr enabled, no combinations are detected, only the respective character obtained by AltGr + Key.