Quote:
Originally Posted by Pjama
I used to use the devmodeon option on the old firmware. I then changed to use the NM to select invert mode.
After the last firmware update I changed my NM config file to use the new dark mode setting which replaced the invert setting.
It worked for a while, and then, when I had it toggled off, it came on automatically when I rotated an ePub. After that, I could not get my Libra out of dark mode so I reset it to factory settings.
When I added NM and config file to my restored Libra, the dark mode toggle did not work, I then reset and tried several times, and it has not worked at all since. I’m using the most recent nickel files I can find but the result is always the same.
|
The only Nickel file you should be using is the one that comes as part of the firmware install. For dark mode, that would mean 4.28.17925 for the Elipsa and 4.28.18220 for all other touch screen models. I did manage a glitch when playing with dark mode and 4.28.17925 on my Clara HD but that was due to trying to change dark mode and invert screen as a single NM command.
If you were referring to the NickelMenu download, I used the one from
message #555 in the
NickelMenu thread.
I haven't found an issue with rotating my Forma where dark mode is on for both portrait and landscape or off for both.
The KoboRoot.tgz invert screen installer is basically just of historical interest now.