Hello, can anyone help me with this problem? I'm trying to jb my Kindle but when I try to boot into diagnostics mode it gives me a "data abort" error and boots normally. The Kindle (KT3) is new and works just fine. No other kind of hacks or modifications have been performed on it. I have searched the forum
and on google, but I can't find anything.
i'm need Serial downgrade but not have tutorial, your have?
Here's the part of the log:
Code:
U-Boot 2014.04 (Apr 08 2021 - 09:44:35)
CPU: Freescale i.MX6SL rev1.4 at 792 MHz
CPU: Temperature 34 C, calibration data: 0x5a05225f
Reset cause: POR
FRED::: EXTCSD177=0, 179=48FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Board: Heisenberg
Board Id: P00118078243032W
S/N: G000KA05825305V7
I2C: ready
DRAM: MR5=0x6,MR6=0x3 512 MiB
WARNING: Caches not enabled
MMC: FRED::: EXTCSD177=0, 179=48FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
REBOOTMODE: 0
using default bootcmdNormal Boot
Hit any key to stop autoboot: 0
uboot > bootm 0xE41000
data abort
pc : [<9ffce81c>] lr : [<9ffc46b4>]
sp : 9fcb9b20 ip : 9fcba259 fp : 9fcba100
r10: 9fcba234 r9 : 9fcb9cdc r8 : 00000001
r7 : 00000000 r6 : 0000070f r5 : 00e41000 r4 : 9ffef3f8
r3 : 00000000 r2 : 00000010 r1 : 00000000 r0 : 00e41000
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...