Quote:
Originally Posted by nhedgehog
Hi It is not the whole CID but only a part of it that you need.
You used this:
cat /sys/block/mmcblk0/device/cid
but need this:
cat /sys/block/mmcblk0/device/serial
|
Hi, When the attempts with CID failed, I tried with the number from the SERIAL file. Also unsuccessful.
Quote:
Originally Posted by nhedgehog
But this works only up to a certain firmware specified in the PB626 internal SD Card fail thread.
|
But it doesn't hurt to try
Fortunately, I found this guide -
https://4pda.to/forum/index.php?show...entry105586602
Following it step by step, we were able to run PocetBook 515W without any problems.