Quote:
Originally Posted by kndlewis
The first step of Brightness (5%) is quite bright.
|
Yeah, I could probably tone it down some, but I don't know if we are talking about the same kind of level.
On my Poke 3, in a shady room, going between 0% and 5% is barely perceptible.
Do you mean it's too bright in a pitch black room?
If you're good with ADB could you tell me if this is the same by you?
Don't worry about the extra stuff as long as those four lines are there.
(The 2nd command ends in a small LM*. If you don't see anything make it plain *)
Code:
$ ls -l /sys/class/backlight
lrwxrwxrwx 1 root root 0 1970-01-06 10:27 warm -> ../../devices/soc/c1b6000.i2c/i2c-6/6-0038/backlight/warm
lrwxrwxrwx 1 root root 0 1970-01-06 10:27 white -> ../../devices/soc/c1b6000.i2c/i2c-6/6-0038/backlight/white
$ ls -l /sys/bus/i2c/drivers/lm*
/sys/bus/i2c/drivers/lm3630a_bl:
lrwxrwxrwx 1 root root 0 2021-07-02 08:05 6-0038 -> ../../../../devices/soc/c1b6000.i2c/i2c-6/6-0038