MobileRead Forums - View Single Post

pityu30 · 03-12-2021, 02:37 PM

Hi!

I tried to install a new firmware yesterday on my Koobe Slightbook HD Shine reader (Rockchip RK2818, 600Mhz, 8Gb of internal ram, 1024x758 light...) . Started the Rkerase utility, the program recognized the device . Load up the firmware img, pushed the restore button but this is what happened. I enclosed a picture.

https://forum.freaktab.com/filedata/...photoid=686834

(The pic is from the internet, but the error messeage is the same with my factory firmware.)

Since then the on light is constantly on with green light, the readers doenn't respond to anything. I took the reader apart shorted the two pins next to the battery held the ok buttond and pushed reset. Afeter this, the erase tool recognized the machine (one of the cubes from the eight is green now) but when I try to reflash the reader, same happens.

Could anybody help?

Regards: István from Hungary

03-12-2021, 02:37 PM	#1
pityu30 Member Posts: 17 Karma: 10 Join Date: May 2015 Location: Hungary Device: Wayteq X-book 60HD, Koobe Slightbook HD Shine	I bricked My Koobe Slightbook HD Hi! I tried to install a new firmware yesterday on my Koobe Slightbook HD Shine reader (Rockchip RK2818, 600Mhz, 8Gb of internal ram, 1024x758 light...) . Started the Rkerase utility, the program recognized the device . Load up the firmware img, pushed the restore button but this is what happened. I enclosed a picture. https://forum.freaktab.com/filedata/...photoid=686834 (The pic is from the internet, but the error messeage is the same with my factory firmware.) Since then the on light is constantly on with green light, the readers doenn't respond to anything. I took the reader apart shorted the two pins next to the battery held the ok buttond and pushed reset. Afeter this, the erase tool recognized the machine (one of the cubes from the eight is green now) but when I try to reflash the reader, same happens. Could anybody help? Regards: István from Hungary Last edited by issybird; 03-13-2021 at 08:55 AM. Reason: Deleted oversize image; URL left.