MobileRead Forums - View Single Post - PW3 Problem with PW3 after serial port mod

eddie.t.h · 02-17-2021, 06:27 AM

The sensor is on the right side of the Led strip. It is such a tiny black rectangle. Right next to the spatula in the photo. A bit higher than a typical smd resistor. Sometimes it breaks off when the front bezel is not properly disassembled.

02-17-2021, 06:27 AM	#4
eddie.t.h Addict Posts: 201 Karma: 123456 Join Date: Jan 2018 Device: Too Much Kindle :-)	The sensor is on the right side of the Led strip. It is such a tiny black rectangle. Right next to the spatula in the photo. A bit higher than a typical smd resistor. Sometimes it breaks off when the front bezel is not properly disassembled. Attached Thumbnails Last edited by eddie.t.h; 02-17-2021 at 06:54 AM.