MobileRead Forums - View Single Post

ReaLx3m · 02-06-2021, 08:40 AM

No screws holding the back on Aura One, its just glued. Just be careful on the bottom, there are two flex cables close to the edge that you could damage in the process(see attach). And when lifting the cover dont do it too fast, first peek at the touch controller(the chip with the flex cable on the bottom right), and see that its not glued to the cover(it can happen) and you dont rip it when pulling on the cover.

02-06-2021, 08:40 AM	#7
ReaLx3m Groupie Posts: 154 Karma: 32060 Join Date: Aug 2017 Device: Kobo Aura H2O, Kobo Aura One, Pocketbook Inkpad 3 Pro	No screws holding the back on Aura One, its just glued. Just be careful on the bottom, there are two flex cables close to the edge that you could damage in the process(see attach). And when lifting the cover dont do it too fast, first peek at the touch controller(the chip with the flex cable on the bottom right), and see that its not glued to the cover(it can happen) and you dont rip it when pulling on the cover. Attached Thumbnails Last edited by ReaLx3m; 02-06-2021 at 08:46 AM.