Hi everyone! I have a change to own an Kindle X Migu (a version of KT3 in China market) and it seem running a version of Android.
Below is what I got via UART cmdline. Can anyone have a look and have an idea? What could I try to do? Sideload Playstore or something crazy?
Code:
U-Boot 2014.04-g4149b2b (Nov 21 2017 - 19:04:04), Build: jenkins-fireos-main-dev-patch-build-46292
CPU: Freescale i.MX6SL rev1.3 at 792 MHz
CPU: Temperature 36 C, calibration data: 0x5905125f
Reset cause: unknown reset
FRED::: EXTCSD177=0, 179=48FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Board: Heisenberg
Board Id: P0011807746309KS
S/N: G000...
I2C: ready
DRAM: 512 MiB
MMC: FRED::: EXTCSD177=0, 179=48FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
REBOOTMODE: 13
using default bootcmdflash target is MMC:1
Battery voltage: 4201 mV
Normal Boot
Hit any key to stop autoboot: 0
mmc1(part 0) is current device
FRED::: EXTCSD177=0, 179=48BOOTing from mmc ...
booti mmc1
Certificate authenticated
==============
Image Metadata
==============
product:eanab
signer:CodeSigner
Image AUTHENTICATED with PRODUCTION certificate
kernel @ 82808000 (4819728)
ramdisk @ 83800000 (763504)
fdt @ 83700000 (34650)
Verify Signed Unlock Code Failed!
kernel cmdline:
use boot.img command line:
console=ttymxc0,115200 init=/init androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale androidboot.selinux=enforcing uart_at_4M androidboot.serialno=G000MR0374650PTG androidboot.unlocked_kernel=false androidboot.prod=1
Using Device Tree in place at 83700000, end 8370b759
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Spoiler:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.53-lab126 (build@i3-ri-14-use1a-b-51) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Wed Sep 30 20:18:04 UTC 2020
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Freescale i.MX6 SoloLite (Device Tree), model: Heisenberg P0
[ 0.000000] cma: CMA: reserved 32 MiB at 9e000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: console=ttymxc0,115200 init=/init androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale androidboot.selinux=enforcing uart_at_4M androidboot.serialno=G000MR0374650PTG androidboot.unlocked_kernel=false androidboot.prod=1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 447MB 64MB = 511MB total
[ 0.000000] Memory: 476152k/476152k available, 48136k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07d89f0 (8003 kB)
[ 0.000000] .init : 0xc07d9000 - 0xc081f4e4 ( 282 kB)
[ 0.000000] .data : 0xc0820000 - 0xc08701e0 ( 321 kB)
[ 0.000000] .bss : 0xc08701e0 - 0xc08af590 ( 253 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L310 cache controller enabled
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32030000, Cache size: 262144 B
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000378] Calibrating delay loop... 789.70 BogoMIPS (lpj=3948544)
[ 0.040122] pid_max: default: 32768 minimum: 301
[ 0.040218] Security Framework initialized
[ 0.040231] SELinux: Initializing.
[ 0.040314] Mount-cache hash table entries: 512
[ 0.044148] CPU: Testing write buffer coherency: ok
[ 0.044399] Setting up static identity map for 0xc05f1bc0 - 0xc05f1c18
[ 0.045194] devtmpfs: initialized
[ 0.047010] pinctrl core: initialized pinctrl subsystem
[ 0.047249] regulator-dummy: no parameters
[ 0.049159] NET: Registered protocol family 16
[ 0.056324] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.057025] LAB126 Board id - P0011807746309KS
[ 0.057097] Use WDOG1 as reset source
[ 0.061602] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
[ 0.061814] vdd1p1: 800 <--> 1375 mV at 1100 mV
[ 0.062060] vdd3p0: 2625 <--> 3400 mV at 3000 mV
[ 0.062315] vdd2p5: 2100 <--> 2850 mV at 2500 mV
[ 0.062536] cpu: 725 <--> 1450 mV at 1100 mV
[ 0.062772] vddpu: 725 <--> 1450 mV
[ 0.063018] vddsoc: 725 <--> 1450 mV at 1175 mV
[ 0.064597] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
[ 0.066282] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
[ 0.067830] amp_boost_enable:iMX:MAX98090:BOARD
[ 0.067857] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.067864] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.070687] imx6sl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.076296] bio: create slab <bio-0> at 0
[ 0.077346] SCSI subsystem initialized
[ 0.077551] usbcore: registered new interface driver usbfs
[ 0.077600] usbcore: registered new interface driver hub
[ 0.077720] usbcore: registered new device driver usb
[ 0.078953] bd7181x 0-004b: IRQ 276 GPIO 116
[ 0.084143] buck1: 800 <--> 2000 mV at 1300 mV
[ 0.085153] buck2: 800 <--> 2000 mV at 1300 mV
[ 0.085954] buck3: 1200 <--> 2700 mV at 1800 mV
[ 0.086716] buck4: 1100 <--> 1850 mV at 1200 mV
[ 0.087477] buck5: 1800 <--> 3300 mV at 3200 mV
[ 0.088225] ldo1: 800 <--> 3300 mV at 3200 mV
[ 0.088978] ldo2: 800 <--> 3300 mV at 3200 mV
[ 0.090140] ldo3: 3000 mV
[ 0.090758] ldo4: 800 <--> 3300 mV at 3200 mV
[ 0.091309] ldo5: 800 <--> 3300 mV at 1800 mV
[ 0.091861] dvref: 3000 mV
[ 0.091992] lpsr: 1800 mV
[ 0.092522] wled: at 0 mV 0 <--> 25 mA at 0 mA
[ 0.093360] i2c i2c-0: IMX I2C adapter registered
[ 0.093940] i2c i2c-1: IMX I2C adapter registered
[ 0.094175] i2c i2c-2: IMX I2C adapter registered
[ 0.094273] pps_core: LinuxPPS API ver. 1 registered
[ 0.094281] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.094303] PTP clock support registered
[ 0.094606] MIPI CSI2 driver module loaded
[ 0.094670] Advanced Linux Sound Architecture Driver Initialized.
[ 0.095288] cfg80211: Calling CRDA to update world regulatory domain
[ 0.095307] cfg80211: World regulatory domain updated:
[ 0.095314] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.095323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.095331] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.095340] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.095347] cfg80211: (5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 0.095354] cfg80211: (5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 0.096527] pureg-dummy: no parameters
[ 0.097119] Switching to clocksource mxc_timer1
[ 0.104749] NET: Registered protocol family 2
[ 0.105346] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.105423] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.105467] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.105513] TCP: reno registered
[ 0.105524] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.105542] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.105735] NET: Registered protocol family 1
[ 0.105972] RPC: Registered named UNIX socket transport module.
[ 0.105983] RPC: Registered udp transport module.
[ 0.105989] RPC: Registered tcp transport module.
[ 0.105995] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.106205] Trying to unpack rootfs image as initramfs...
[ 0.152758] Freeing initrd memory: 744K (c3800000 - c38ba000)
[ 0.153102] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.153611] ldo2p5-dummy: no parameters
[ 0.154249] Bus freq driver module loaded
[ 0.154493] persistent_ram: no valid data in buffer (sig = 0x41470244)
[ 0.154513] persistent_ram: no valid data in buffer (sig = 0x40474244)
[ 0.154534] persistent_ram: no valid data in buffer (sig = 0x03444871)
[ 0.154999] console [pstore-1] enabled
[ 0.155007] pstore: Registered ramoops as persistent store backend
[ 0.155017] ramoops: attached 0x100000@0x9bf00000, ecc: 0/0
[ 0.155030] mxc_ramoops device success loaded
[ 0.155464] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.155498] audit: initializing netlink socket (disabled)
[ 0.155537] type=2000 audit(0.140:1): initialized
[ 0.160536] VFS: Disk quotas dquot_6.5.2
[ 0.160676] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.161889] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.162516] NFS: Registering the id_resolver key type
[ 0.162566] Key type id_resolver registered
[ 0.162577] Key type id_legacy registered
[ 0.162614] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.163065] fuse init (API version 7.22)
[ 0.163409] msgmni has been set to 995
[ 0.166691] io scheduler noop registered
[ 0.166709] io scheduler deadline registered
[ 0.166750] io scheduler cfq registered (default)
[ 0.173202] Serial: IMX driver
[ 0.173474] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
[ 0.948334] console [ttymxc0] enabled
[ 0.952436] 2034000.serial: ttymxc2 at MMIO 0x2034000 (irq = 60) is a IMX
[ 0.959614] imx6sl-pinctrl 20e0000.iomuxc: pin MX6SL_PAD_SD1_DAT4 already requested by 20e0000.iomuxc; cannot claim for 2038000.serial
[ 0.971750] imx6sl-pinctrl 20e0000.iomuxc: pin-145 (2038000.serial) status -22
[ 0.979001] imx6sl-pinctrl 20e0000.iomuxc: could not request pin 145 on device 20e0000.iomuxc
[ 0.987551] imx-uart 2038000.serial: Error applying setting, reverse things back
[ 0.995014] 2038000.serial: ttymxc3 at MMIO 0x2038000 (irq = 61) is a IMX
[ 1.002270] serial: Freescale lpuart driver
[ 1.007441] HALL_SENSOR: Probe is called heisenberg_hall_probe:452
[ 1.013723] HALL_SENSOR: Probe is called heisenberg_hall_probe:473
[ 1.020161] input: heisenberg_hall.17 as /devices/soc0/heisenberg_hall.17/input/input0
[ 1.028702] imx sema4 driver is registered.
[ 1.037522] brd: module loaded
[ 1.042974] loop: module loaded
[ 1.046180] bt_pwrctrl_init called..
[ 1.049823]
[ 1.049823] bt_reset pin obtained is 51
[ 1.055331]
[ 1.055331] bt_dev_wake pin obtained is 138
[ 1.061030]
[ 1.061030] bt_host_wake pin obtained is 93
[ 1.066719] IRQ# for BT HOST WAKE: 253
[ 1.070605] bt_pwrctrl_probe probe successful
[ 1.076610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.083434] usbcore: registered new interface driver usb-storage
[ 1.090299] imx6sl-pinctrl 20e0000.iomuxc: pin MX6SL_PAD_EPDC_PWRCOM already requested by 20e0000.iomuxc; cannot claim for 2184000.usb
[ 1.102440] imx6sl-pinctrl 20e0000.iomuxc: pin-56 (2184000.usb) status -22
[ 1.109346] imx6sl-pinctrl 20e0000.iomuxc: could not request pin 56 on device 20e0000.iomuxc
[ 1.117808] imx_usb 2184000.usb: Error applying setting, reverse things back
[ 1.129073] usb_gadget_state_work: gadget state: not attached
[ 1.577175] imx_usb 2184000.usb: vbus is error
[ 1.581638] imx_usb 2184000.usb: Error occurs during detection: -22
[ 1.588425] mousedev: PS/2 mouse device common for all mice
[ 1.599702] bd7181x-rtc bd7181x-rtc: rtc core: registered bd7181x-rtc as rtc0
[ 1.607319] bd7181x-rtc probe time: 121:0:27-15:29:17:
[ 1.612947] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1
[ 1.621386] i2c /dev entries driver
[ 1.625414] bd7181x-power bd7181x-power: battery_cycle = 0
[ 1.631601] Status Register 1 == 0x0
[ 1.635598] Status Register 2 == 0x0
[ 1.639607] Status Register 3 == 0x40
[ 1.643682] Status Register 4 == 0x0
[ 1.647684] Status Register 5 == 0xb0
[ 1.651756] Status Register 6 == 0x0
[ 1.655738] Status Register 7 == 0x0
[ 1.659738] Status Register 8 == 0x2
[ 1.663722] Status Register 9 == 0x0
[ 1.667725] Status Register 10 == 0x0
[ 1.671796] Status Register 11 == 0x0
[ 1.675868] Status Register 12 == 0x0
[ 1.682351] errflags = 1
[ 1.684893] bit0 is set
[ 1.687362] [RESET REASONS]: SOFTWARE_RESTART: Software Shutdown
[ 1.708802] input: bd7181x-power as /devices/soc0/soc.2/2100000.aips-bus/21a0000.i2c/i2c-0/0-004b/bd7181x-power/input/input1
[ 1.721242] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) imx2_wdt.base=0xe09f0000 base pa:0x20bc000 imx2_wdt.clk=0xd800c100
[ 1.735702] cpuidle: using governor ladder
[ 1.739927] cpuidle: using governor menu
[ 1.743925] sdhci: Secure Digital Host Controller Interface driver
[ 1.750145] sdhci: Copyright(c) Pierre Ossman
[ 1.754548] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.764567] mmc1: no vqmmc regulator found
[ 1.768724] mmc1: Not allowing HS200
[ 1.772332] mmc1: no vmmc regulator found
[ 1.817171] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using DMA
[ 1.827583] mmc0: no vqmmc regulator found
[ 1.831695] mmc0: Not allowing HS200
[ 1.835280] mmc0: no vmmc regulator found
[ 1.877165] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using DMA
[ 1.886066] usbcore: registered new interface driver usbhid
[ 1.891694] usbhid: USB HID core driver
[ 1.896074] ashmem: initialized
[ 1.901446] logger: created 32K log 'log_metrics'
[ 1.906293] logger: created 16K log 'log_vitals'
[ 1.911084] logger: created 128K log 'log_kernel'
[ 1.916081] Registering kernel log console
[ 1.923172] console [klog-1] enabled
[ 1.936842] NET: Registered protocol family 26
[ 1.941389] Netfilter messages via NETLINK v0.30.
[ 1.948247] nf_conntrack version 0.5.0 (7963 buckets, 31852 max)
[ 1.956727] ctnetlink v0.93: registering with nfnetlink.
[ 1.964169] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.973204] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.981245] xt_time: kernel timezone is -0000
[ 1.987968] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.995445] arp_tables: (C) 2002 David S. Miller
[ 2.003192] TCP: cubic registered
[ 2.011026] NET: Registered protocol family 10
[ 2.016177] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.021753] sit: IPv6 over IPv4 tunneling driver
[ 2.026862] NET: Registered protocol family 17
[ 2.033456] 8021q: 802.1Q VLAN Support v1.8
[ 2.037748] Key type dns_resolver registered
[ 2.042254] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 2.064568] ldo5: disabling
[ 2.080979] ldo4: disabling
[ 2.086180] vddsoc: disabling
[ 2.091214] cpu: disabling
[ 2.096967] regulator-dummy: disabling
[ 2.104983] imx mcc test is registered.
[ 2.109359] file system registered
[ 2.113729] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.120667] android_usb gadget: Number of LUNs=1
[ 2.125296] lun0: LUN: removable file: (no medium)
[ 2.132444] android_usb gadget: android_usb ready
[ 2.137665] bd7181x-rtc bd7181x-rtc: setting system clock to 2021-01-27 15:29:18 UTC (1611761358)
[ 2.160114] ALSA device list:
[ 2.165155] No soundcards found.
[ 2.171008] Freeing unused kernel memory: 280K (c07d9000 - c081f000)
[ 2.281439] mmc0: BKOPS_EN bit is not set
[ 2.303662] mmc0: new high speed DDR MMC card at address 0001
[ 2.309801] mmcblk0: mmc0:0001 NJ2ZMB 3.64 GiB
[ 2.314438] mmcblk0boot0: mmc0:0001 NJ2ZMB partition 1 4.00 MiB
[ 2.325015] type=1403 audit(1611761358.680:2): policy loaded auid=4294967295 ses=4294967295
[ 2.333495] usb_gadget_state_work: gadget state: suspended
[ 2.339161] mmcblk0boot1: mmc0:0001 NJ2ZMB partition 2 4.00 MiB
[ 2.345194] mmcblk0rpmb: mmc0:0001 NJ2ZMB partition 3 512 KiB
[ 2.360225] type=1404 audit(1611761358.710:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 2.371802] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 2.379272] GPT:1 != 7634943
[ 2.382163] GPT:Alternate GPT header not at the end of the disk.
[ 2.388215] GPT:1 != 7634943
[ 2.391103] GPT: Use GNU Parted to correct GPT errors.
[ 2.396277] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p7
[ 2.403981] mmcblk0boot1: unknown partition table
[ 2.410983] mmcblk0boot0: unknown partition table
[ 2.498958] init: /init.base.rc: 96: ignored duplicate definition of service 'devicetype'
[ 2.508878] init: could not import file '/init.debug.rc' from '/init.rc'
[ 2.749875] init: /dev/hw_random not found
[ 2.765877] init: /dev/hw_random not found
[ 2.785150] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.793852] fs_mgr: __mount(source=/dev/block/platform/soc0/soc.2/by-name/system,target=/system,type=ext4)=0
[ 2.804680] EXT4-fs (mmcblk0p7): Ignoring removed nomblk_io_submit option
[ 2.818592] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic
[ 2.830252] fs_mgr: __mount(source=/dev/block/platform/soc0/soc.2/by-name/userdata,target=/data,type=ext4)=0
[ 2.840980] EXT4-fs (mmcblk0p6): Ignoring removed nomblk_io_submit option
[ 2.853345] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: nomblk_io_submit
[ 2.862483] fs_mgr: __mount(source=/dev/block/platform/soc0/soc.2/by-name/cache,target=/cache,type=ext4)=0
[ 2.950560] selinux_android_load_policy_helper: SELinux policy on userdata not supported
[ 2.971579] android_usb: already disabled
[ 2.975687] ci_udc_pullup:1636 Device is in suspended state
[ 2.981406] usb_gadget_state_work: gadget state: powered
[ 2.986771] android_work: did not send uevent (0 0 (null))
[ 3.009421] Zforce2 regulator is not enabled! Enabling Zforce2 touch regulator...
[ 3.018579] Zforce2 touch regulator is enabled!
[ 3.084643] input: zforce2 as /devices/platform/zforce2.0/input/input2
[ 3.308371] FAT-fs (mmcblk0p3): Volume was not safely ejected. Run fsck to correct.
[ 3.376207] mxc_epdc_eink: module license 'proprietary' taints kernel.
[ 3.382840] Disabling lock debugging due to kernel taint
[ 3.391570] Panel VCOM string: 2760
[ 3.394919] imx_epdc_fb 20f4000.epdc: vcom_steps 128
[ 3.404268] imx_epdc_fb 20f4000.epdc: EPDC version = 2.1.0
[ 3.439316] android_work: did not send uevent (0 0 (null))
[ 3.457233] usb_gadget_state_work: gadget state: not attached
[ 3.490746] wv_file->wdh.luts & 0xC =4
[ 4.950250] EPDC temperature changed from 0 to 32 [Override temp 4097].
[ 5.107402] usb_gadget_state_work: gadget state: powered
[ 5.201903] amazon-healthd: Disabling periodic chores and wake up of healthd.
[ 5.264423] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 5.278867] healthd: wakealarm_init: timerfd_create failed
[ 5.285507] healthd: Could not open '/etc/monitoring.conf'
[ 5.299646] android_work: sent uevent USB_STATE=CONNECTED
[ 5.320177] usb_gadget_state_work: gadget state: addresssed
[ 5.326943] vp: ******* running vpartition ***********
[ 5.394149] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
root@eanab:/ # [ 5.500180] init: Warning! Service settime needs a SELinux domain defined; please fix!
[ 5.523525] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
[ 5.533411] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
[ 5.544012] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
[ 5.567516] mtp_bind_config
[ 5.582230] usb_gadget_state_work: gadget state: suspended
[ 5.685749] android_work: sent uevent USB_STATE=DISCONNECTED
[ 5.774927] android_work: sent uevent USB_STATE=CONNECTED
[ 5.787581] usb_gadget_state_work: gadget state: addresssed
[ 5.890252] android_usb gadget: high-speed config #1: android
[ 5.896153] usb_gadget_state_work: gadget state: configured
[ 5.903757] android_work: sent uevent USB_STATE=CONFIGURED
[ 5.979427] type=1400 audit(1611761362.330:4): avc: denied { write } for pid=116 comm="recovery_report" name="/" dev="tmpfs" ino=1350 scontext=u:r:recovery_reporter:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 6.117407] EXT4-fs (loop1): recovery complete
[ 6.199519] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.220471] vp: successfully mounted /dev/block/loop1 at /data/metrics
[ 7.917428] ****LOGD_PUBLISHER****: added new subscriber LOG_DUMPER (0xb8870898)
[ 7.924968] ****LOGD_PUBLISHER****: added new subscriber METRICS_SUBSCRIBER (0xb8871f90)
[ 8.118660] EPDC temperature changed from 32 to 31 [Override temp 4097].
[ 8.767523] ****LOGD_SUBSCRIBER****: starting LOG_DUMPER service!
[ 8.977815] ****LOGD_SUBSCRIBER****: starting METRICS_SUBSCRIBER service!
[ 10.957350] warning: `main' uses 32-bit capabilities (legacy support in use)
[ 11.399807] ****LOGD_KERNEL_PROXY****: starting vitals proxy thread! fd 13
[ 11.409209] ****LOGD_KERNEL_PROXY****: starting metrics proxy thread! fd 12
[ 11.416597] ****LOGD_KERNEL_PROXY****: starting kernel proxy thread! fd 7
[ 11.532964] ****LOGD_BASE****: LOG_DUMPER is successfully initialized
[ 11.625809] ****LOGD_METRICS_HANDLER****: /data/metrics/dedicated.db is opened
[ 11.635657] ****LOGD_BASE****: METRICS_SUBSCRIBER is successfully initialized
[ 15.385490] EPDC temperature changed from 31 to 32 [Override temp 4097].
[ 20.281710] healthd: battery l=95 v=4199 t=32.0 h=2 st=2 c=324 chg=au
[ 21.356640] binder: 106:106 BC_REQUEST_DEATH_NOTIFICATION death notification already set
[ 21.536492] acc_open
[ 21.542518] acc_release
[ 23.400715] dhd_module_init in
[ 23.403792] dhd_module_init fw_image_unaligned=d8780000 fw_image=d8780000
[ 23.464529] brcm_wlan_power: setting gpio #[47] on
[ 23.637332] found wifi platform device bcmdhd_wlan
[ 23.651072] dhd_module_init out
[ 24.079373] mmc1: new high speed SDIO card at address 0001
[ 24.129952] alloc static buf at d86c0000!
[ 24.163094] F1 signature read @0x18000000=0x1531a9a6
[ 24.207299] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x1 pkg:0x3
[ 24.277364] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
[ 24.352569] wifi_platform_get_mac_addr
[ 24.397287] wl_create_event_handler(): thread:wl_event_handler:28e started
[ 24.404251] wl_event_handler: tsk enter, tsk = 0xd932fddc
[ 24.435947] dhd_attach(): thread:dhd_watchdog_thread:28f started
[ 24.463120] dhd_attach(): thread:dhd_dpc:291 started
[ 24.477602] dhd_deferred_work_init: work queue initialized
[ 24.499336] dhdsdio_download_code_file: download firmware '/system/vendor/firmware/fw_bcmdhd.bin' and save a copy to d8780000
[ 24.728336] dhdsdio_download_code_file finished f/w download fw_image_size=354679
[ 24.797843] dhdsdio_download_nvram: MAX=4096 len=906 read
[ 24.803264] dhdsdio_download_nvram: MAX=4096 len=906 saved
[ 24.877987] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 24.962897] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 25.044286] wifi_platform_get_mac_addr
[ 25.058800] Firmware up: op_mode=0x0005, MAC=xx:xx:xx:xx:f2:e6
[ 25.137767] Firmware version = wl0: Oct 21 2019 15:07:12 version 7.45.97.13 (r722985) FWID 01-c410fe51
[ 25.181184] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
[ 25.219054] dhd_wlfc_init: query wlfc_mode succeed, fw_caps=0x1c
[ 25.261378] dhd_wlfc_init(): wlfc_mode=0x1c, ret=0
[ 25.267977] Dongle Host Driver, version 1.201.59.2 (r)
[ 25.267977] Compiled in drivers/net/wireless/bcmdhd on Sep 30 2020 at 20:19:37
[ 25.321490] Register interface [wlan0] MAC: xx:xx:xx:xx:f2:e6
[ 25.321490]
[ 25.896407] dhd_set_suspend: Remove extra suspend setting
[ 27.360051] Connecting with xx:xx:xx:xx:45:44 channel (9) ssid "REDACTED", len (8)
[ 27.360051]
[ 27.394408] wl_bss_connect_done succeeded with xx:xx:xx:xx:45:44
[ 27.477853] wl_bss_connect_done succeeded with xx:xx:xx:xx:45:44
[ 27.895890] dhd_set_suspend: Remove extra suspend setting
[ 32.229790] bd7181x_rtc_set_time, rtc time set to SS:MM:HH:DD:MM:YY 0x49:0x29:0x95:0x27:0x1:0x21
[ 38.733699] mtp_open
[ 45.879798] wldev_set_country: set country for VN as XZ rev 990
root@eanab:/ # [ 52.040346] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH_IND
[ 52.049705] link down if wlan0 may call cfg80211_disconnected. event : 6, reason=2 from xx:xx:xx:xx:45:44
[ 52.062039] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK
[ 52.070762] cfg80211: Calling CRDA to update world regulatory domain
[ 52.078888] Set country code 00 from initiator 0
[ 52.100357] wldev_set_country: set country for 00 as XZ rev 990
[ 52.106296] cfg80211: World regulatory domain updated:
[ 52.113461] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 52.122246] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.134082] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 52.141933] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 52.150057] cfg80211: (5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 52.157620] cfg80211: (5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 52.409773] Connecting with xx:xx:xx:xx:45:44 channel (9) ssid "REDACTED", len (8)
[ 52.409773]
[ 52.483250] wl_bss_connect_done succeeded with xx:xx:xx:xx:45:44
[ 52.587499] wl_bss_connect_done succeeded with xx:xx:xx:xx:45:44
[ 52.646419] dhd_set_suspend: Remove extra suspend setting