Has anyone had any luck getting the Onyx Boox Poke 3 to connect to Calibre on Linux?
I can access the device in the file manager: mtp:/Poke3/Internal shared storage/Download/
But Calibre doesn't seem to see it.
Any suggestions?
Thank you
My Debug Device Detection follows:
Spoiler:
calibre 5.8.1 embedded-python: True is64bit: True
Linux-5.4.0-59-generic-x86_64-with-glibc2.2.5 Linux ('64bit', 'ELF')
('Linux', '5.4.0-59-generic', '#65-Ubuntu SMP Thu Dec 10 12:01:51 UTC 2020')
Python 3.8.5
Interface language: None
Successfully initialized third party plugins: DeDRM (7, 0, 0) && EpubSplit (3, 0, 0)
USB devices on system:
[['0x413c', '0x301a', '0x100', 'PixArt', 'Dell MS116 USB Optical Mouse', ''],
['0x18d1', '0x4ee1', '0x404', 'ONYX', 'SDM636-MTP _SN:4C038640', 'ac47ca16'],
['0x3f0', '0xd711', '0x100', 'HP', 'ENVY 4520 series', 'TH7684H22G0660'],
['0xcf3', '0xe005', '0x2', '', '', ''],
['0x46d', '0xc31d', '0x6601', 'Logitech', 'USB Keyboard', ''],
['0xbda', '0x129', '0x3960', 'Generic', 'USB2.0-CRW', '20100201396000000']]
No disabled plugins
Looking for devices of type: MTP_DEVICE
MTP devices connected:
USBDevice(busnum=2, devnum=4, vendor_id=0x18d1, product_id=0x4ee1, bcd=0x0404, manufacturer=ONYX, product=SDM636-MTP _SN:4C038640, serial=ac47ca16)
Trying to open: USBDevice(busnum=2, devnum=4, vendor_id=0x18d1, product_id=0x4ee1, bcd=0x0404, manufacturer=ONYX, product=SDM636-MTP _SN:4C038640, serial=ac47ca16)
Opening device failed:
Traceback (most recent call last):
File "calibre/devices/mtp/unix/driver.py", line 217, in open
File "calibre/devices/mtp/base.py", line 25, in synchronizer
File "calibre/devices/mtp/unix/driver.py", line 168, in create_device
libmtp.MTPError: Unable to open MTP device with busnum=2 and devnum=4, tried 1 such devices
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "calibre/devices/mtp/unix/driver.py", line 146, in debug_managed_device_detection
File "calibre/devices/mtp/driver.py", line 128, in open
File "calibre/devices/mtp/base.py", line 25, in synchronizer
File "calibre/devices/mtp/unix/driver.py", line 220, in open
calibre.devices.errors.OpenFailed: Failed to open USBDevice(busnum=2, devnum=4, vendor_id=0x18d1, product_id=0x4ee1, bcd=0x0404, manufacturer=ONYX, product=SDM636-MTP _SN:4C038640, serial=ac47ca16): Error: Unable to open MTP device with busnum=2 and devnum=4, tried 1 such devices
Looking for devices of type: SMART_DEVICE_APP
All IP addresses {'lo': [{'addr': '127.0.0.1', 'netmask': '255.0.0.0', 'peer': '127.0.0.1'}], 'wlp2s0': [{'addr': '192.168.1.153', 'netmask': '255.255.255.0', 'broadcast': '192.168.1.255'}], 'wgpia0': [{'addr': '10.14.209.46', 'netmask': '255.255.255.255', 'peer': '10.14.209.46'}]}
No device is connected
Looking for devices...
Devices possibly connected: None