MobileRead Forums - View Single Post

centuri · 11-01-2020, 01:50 PM

I have been looking in to modifying my Kindle KT3 and there does not seem to be much information on the internal connections/pads/pins beyond the serial and USB boot modifications for jailbreaking and recovery. I attached an image. Does anyone know what the connections are that I marked on the image of the board or if there is anyway to get internal access to a system bus such as USB Host or PCI-E to add other devices such as mass storage?

11-01-2020, 01:50 PM	#1
centuri Junior Member Posts: 1 Karma: 10 Join Date: Nov 2020 Device: K1, KT3, Kindle Fire HD 10(2019), iPad Gen1, iPad Gen2, Android Tablet	KT3 Hardware Mod Question I have been looking in to modifying my Kindle KT3 and there does not seem to be much information on the internal connections/pads/pins beyond the serial and USB boot modifications for jailbreaking and recovery. I attached an image. Does anyone know what the connections are that I marked on the image of the board or if there is anyway to get internal access to a system bus such as USB Host or PCI-E to add other devices such as mass storage? Attached Thumbnails