[István Gulyás]

Hi,
I have an old Wayteq ebook 60w device.I would like use it again, but my computer cannot recognise it .Could you help me please?
I copied datas of device:

calibre 5.2 [64bit] embedded-python: True is64bit: True
Windows-10-10.0.18362-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.18362')
Python 3.8.5
Windows: ('10', '10.0.18362', 'SP0', 'Multiprocessor Free')
Interface language: hu
USB devices on system:
(USBDevice(vendor_id=0x64e product_id=0xe330 bcd=0x100 devid=usb\vid_064e&pid_e330&rev_0100 devinst=3),
USBDevice(vendor_id=0x1ea7 product_id=0x10c0 bcd=0x200 devid=usb\vid_1ea7&pid_10c0&rev_0200 devinst=4),
USBDevice(vendor_id=None product_id=None bcd=None devid=usb\root_hub20&vid8086&pid9c26&rev0004 devinst=5),
USBDevice(vendor_id=0x64e product_id=0xe330 bcd=0x100 devid=usb\vid_064e&pid_e330&rev_0100&mi_00 devinst=7),
USBDevice(vendor_id=0x4ca product_id=0x300b bcd=0x1 devid=usb\vid_04ca&pid_300b&rev_0001 devinst=8),
USBDevice(vendor_id=0x5e3 product_id=0x726 bcd=0x222 devid=usb\vid_05e3&pid_0726&rev_0222 devinst=14),
USBDevice(vendor_id=None product_id=None bcd=None devid=usb\root_hub30&vid8086&pid9c31&rev0004 devinst=9),
USBDevice(vendor_id=0x8087 product_id=0x8000 bcd=0x4 devid=usb\vid_8087&pid_8000&rev_0004 devinst=10))

No disabled plugins
Looking for devices of type: MTP_DEVICE
The Windows WPD service says there are no portable devices connected

Looking for devices of type: SMART_DEVICE_APP
All IP addresses {'{8073CC6C-4885-4712-B13F-32F34FF2E328}': [{'addr': '192.168.1.83', 'netmask': '255.255.255.0', 'broadcast': '192.168.1.255'}], '{9DEA6D13-0A9A-41B5-ABCD-6DE312D1117F}': [{'addr': '192.168.137.1', 'netmask': '255.255.255.0', 'broadcast': '192.168.137.255'}], '{846EE342-7039-11DE-9D20-806E6F6E6963}': [{'addr': '127.0.0.1', 'netmask': '255.0.0.0', 'broadcast': '127.255.255.255'}]}
No device is connected

Looking for devices...
USBDevice(vendor_id=0x5e3 product_id=0x726 bcd=0x222 devid=usb\vid_05e3&pid_0726&rev_0222 devinst=14)
Detected possible device WAYTEQ

Devices possibly connected: WayteQ device interface,
Trying to open WayteQ device interface ... Storage number map:
{(7, 0): [(2, 'C')]}
Storage number map:
{(7, 0): [(2, 'C')]}
Drive letters for USBDevice(vendor_id=0x5e3 product_id=0x726 bcd=0x222 devid=usb\vid_05e3&pid_0726&rev_0222 devinst=14)
{'drive_letters': [],
'pnp_id_map': {},
'readonly_drives': set(),
'sort_map': {}}
failed
Opening of the following devices failed
<calibre.devices.misc.WAYTEQ object at 0x0000020597654D30>
Traceback (most recent call last):
File "calibre\devices\__init__.py", line 159, in debug
File "calibre\devices\usbms\device.py", line 823, in open
File "calibre\devices\usbms\device.py", line 275, in open_windows
calibre.devices.errors.DeviceError: Unable to detect any disk drives for the device: WayteQ xBook. Try rebooting

USB gyártó ID (hexában): 0x5e3
USB termék ID (hexában): 0x726
USB revízió ID (hexában): 0x222