Quote:
Originally Posted by utkarshj
GUIDE:
1. Buy a usb hub like this which supports providing external power by a 5V DC adapter.
OR
2. Modify your OTG cable to supply power from another power source to the usb device.
Short steps:
Needed: 1xOTG cable and 1xUSB cable with a Male USB port.
1. Strip a small portion of the wire covering of the OTG cable (in the middle) to expose the 4 wires within.
2. Let the data cables remain connected (green and white)
3. Cut the black and red power wires.
4. Make sure the power wires comming from the ereader side dont short together.
|
formatting seems off. am i reading right?
is this short steps sections supposed to go with OPTION 2
if we have OPTION 1, no further mod needed