[thoriki]

Originally Posted by knc1

<3>[    2.345492] Regulator Fault Occurred! Retrying powerup...

Seems like a solid hardware error message to me.
And:

I try use fastboot in bist, and consale say all time "battery voltage: xxxx mV

That is the standard output while the fastboot host is running, which is the command you gave the machine.

ty very for u reply (sorry my english is very badly)
i read u reply and disonnect all and reconnet and, no have this error more.

have other problems, i follow steps guide and have 2 problems.

1º i put ""bootm 0xE41000""
and this is result (cant get next step of guide)

Spoiler:

U-Boot 2009.08-lab126 (Nov 15 2019 - 00:11:26)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 31 C, calibration data 0x59b5125f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 24000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Muscat WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 06703091630701WD
S/N: G090G105631306JW
I2C: ready
DRAM: 512 MB
Using default environment

In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0x1fff0000
POST done in 112 ms
Battery voltage: 4108 mV

Hit any key to stop autoboot: 0
uboot > bootm 0xE41000
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2634732 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

[ 0.098588] boot: C def:bcut:batterycut=1
[ 0.286768] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.290632]
[ 0.290635] just text: vaddr c0150d44, va 0xc0150200 pa 0x801000c3 attr 0x6
[ 0.303172]
[ 0.303176] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0x2
[ 0.312037]
[ 0.312041] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2
[ 0.320381]
[ 0.320385] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.331225]
[ 0.331228] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.345593]
[ 0.345596] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.357727]
[ 0.357730] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.368134]
[ 0.368137] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.378039]
[ 0.378042] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Mon Mar 21 19:16:25 PDT 2016 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/99776 size=3269459968 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 6385648
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
init started: BusyBox v1.17.1 (2016-03-21 19:09:42 PDT)
starting pid 629, tty '': '/etc/init.d/rcS'
/etc/init.d/rcS: line 85: boot_milestone: not found
system: I rcS:def:starting /etc/rcS.d/S50diags
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
READ_AHEAD=4
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
IO_SCHED=anticipatory
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
TMP_SIZE=32M
info firsttime:mount_rw:time=6590:Mounting root RW for first boot
info firsttime:cursor:Linking Xorg cursor:
ln: /usr/share/fonts/X11/misc/cursor.pcf: No such file or directory
info firsttime:mount_ro:time=6620:Mounting root RO
[ 6.686623] elevator: type
[ 6.686627] not found
[ 6.691782] elevator: switch to
[ 6.691786] failed
[ 6.705569] elevator: type
[ 6.705574] not found
[ 6.710789] elevator: switch to
[ 6.710794] failed
[ 6.724517] elevator: type
[ 6.724522] not found
[ 6.729724] elevator: switch to
[ 6.729728] failed
info system:start:time=6730:
/etc/rcS.d/S50diags: line 500: f_proto: not found
info hardware:no_wan::WiFi only device. No WAN found
info system:configlatform=wario,board=muscat,rev=3,pr oto=N,wifi=Y,wan=N:
info system:done:time=7200:
ls: /lib/firmware/cyttsp4/muscat*.bin: No such file or directory
info cyttsp4:update:cyttsp4 fw ver=00D3 file version=.bin:
/etc/upstart/cyttsp: line 49: syntax error: 0x.bin
crit modules:modprobe_failed:failed to load touch module:
/etc/rcS.d/S50diags: line 500: iptables-restore: not found
/opt/ar6k/include/dbglog.h.save: No such file or directory
info userstore:run:time=8530,action=start:
info userstore:start:found_bootup_flag:Found BOOTUP flag file
dosfsck 2.11 (12 Mar 2005)
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Checking we can access the last sector of the filesystem
Boot sector contents:
System ID "mkdosfs"
Media byte 0xf8 (hard disk)
512 bytes per logical sector
8192 bytes per cluster
2134 reserved sectors
First FAT starts at byte 1092608 (sector 2134)
2 FATs, 32 bit entries
1594880 bytes per FAT (= 3115 sectors)
Root directory start at cluster 2 (arbitrary size)
Data area starts at byte 4282368 (sector 8364)
398580 data clusters (3265167360 bytes)
32 sectors/track, 64 heads
0 hidden sectors
6385648 sectors total
Checking for unused clusters.
Checking free cluster summary.
/dev/loop/0: 1519 files, 110950/398580 clusters
Wifi cal bin symbolic link AR6003_calfile.bin is already created
system: I mntroot:def:Making root filesystem writeable
ln: /usr/local/sbin/dropbear: File exists
ln: /usr/local/sbin/dropbearkey: File exists
/etc/rcS.d/S50diags: line 13: /usr/local/sbin/dropbearkey: not found
system: I mntroot:def:Making root filesystem read-only
/etc/rcS.d/S50diags: line 13: /usr/local/sbin/dropbear: not found
mounting waveform filesystem
waveform filesystem already mounted
info display:update:Checking '/opt/eink/images/R094_ED060KD1C2' for overrides:
umounting waveform filesystem
drawing default
cannot find image: /opt/amazon/low_level_screens/splash.png
info display:started:time=11020:
/etc/upstart/battery-diags: line 91: f_proto: not found
info battery:charged:cap=94,mV=4104,mAH=1396:
USER=root
prevlevel=N
OLDPWD=/
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/dev
VERBOSE=no
LD_LIBRARY_PATH=/usr/lib/tts/speech/components/common/:/usr/lib/tts
/etc/rcS.d/S50diags: line 13: kb: not found
diags : /opt/factory/rootfs_md5_list not found.
Change list is: [291999]
Sending: mkdir -p /mnt/base-us/diagnostic_logs/
PostMode len = 6 of 16
Ignoring PostMode
DiscoveryObjectImpl:getDeviceDiagsInfo FOUND: MUSCAT_WFO: [067] [103] with 06703091630701WD
Device found: MUSCAT_WFO [067] [103]
GlobalHalImpl: found DeviceType: 0x67
found: cyttsp4_i2c
found: cyttsp4_core
found: cyttsp4_mt_b
[ 11.241503] cyttsp4_device_access_init: Registering device access device for core_id: main_ttsp_core
[ 11.251651] cyttsp4_device_access cyttsp4_device_access.main_ttsp_core: cyttsp4_device_access_probe
[ 11.261614] cyttsp4_device_access_init: Cypress TTSP Device Access (Built 20121109) rc=0
Input driver version is 1.0.1
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "max77696-onkey"
Supported events:
Input driver version is 1.0.1
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "cyttsp4_mt"
Supported events:
failed to open /dev/input/event2
failed to open /dev/input/event3
failed to open /dev/input/event4
failed to open /dev/input/event5
failed to open /dev/input/event6
failed to open /dev/input/event7
Ignoring PostMode
diag>open_device m_vsInfo.xres: 1072
get_m_test_xmlFile wfo.xml
device type = 0x67
PCBID: 06703091630701WD
TCP_IP_Server_Handler:start_USBnet Enabling USB net
Cannot open xmlFile /mnt/base-us/USBnet.xml
NOT Found NFS path
[ 11.467583] unregistered gadget driver 'g_file_storage'
ERROR: Module g_serial does not exist in /proc/modules
[ 11.554447] usb0: MAC ee:59:00:00:00:15
[ 11.567549] usb0: HOST MAC ee:29:00:00:00:15
[ 11.571832] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (ECM)
[ 11.597424] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 11.604059] g_ether gadget: g_ether ready
[ 11.610748] fsl-usb2-udc: bind to driver g_ether
system: I mntroot:def:Making root filesystem writeable
[ 11.665324] EXT3-fs (mmcblk0p2): using internal journal
[ 12.047771] g_ether gadget: high speed config #2: RNDIS
[ 12.390744] KERNEL: I pmic:charger chgina::charger disconnected
sock_init 1888

2º in the previous spoiler I have been able to see one line say "press enter for recovery menu" i enter and cant follow new step os guide.

Spoiler:

U-Boot 2009.08-lab126 (Nov 15 2019 - 00:11:26)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 30 C, calibration data 0x59b5125f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 24000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Muscat WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 06703091630701WD
S/N: G090G105631306JW
I2C: ready
DRAM: 512 MB
Using default environment

In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0x1fff0000
POST done in 112 ms
Battery voltage: 4106 mV

Hit any key to stop autoboot: 0
uboot > bootm 0xE41000
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2634732 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

[ 0.098586] boot: C def:bcut:batterycut=1
[ 0.286759] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.290621]
[ 0.290625] just text: vaddr c0150d44, va 0xc0150200 pa 0x801000c3 attr 0x6
[ 0.303166]
[ 0.303170] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0x2
[ 0.312032]
[ 0.312035] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2
[ 0.320374]
[ 0.320377] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.331218]
[ 0.331221] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.345585]
[ 0.345588] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.357719]
[ 0.357722] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.368125]
[ 0.368128] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.378030]
[ 0.378033] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Mon Mar 21 19:16:25 PDT 2016 armv7l

















Press [ENTER] for recovery menu... 0 /
Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /

Charge: 94% [################################################## ######::]


Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 1 -
Menu timeout

BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
init started: BusyBox v1.17.1 (2016-03-21 19:09:42 PDT)
starting pid 628, tty '': '/etc/init.d/rcS'
/etc/init.d/rcS: line 85: boot_milestone: not found
system: I rcS:def:starting /etc/rcS.d/S50diags
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
READ_AHEAD=4
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
IO_SCHED=anticipatory
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
TMP_SIZE=32M
info firsttime:mount_rw:time=17200:Mounting root RW for first boot
info firsttime:cursor:Linking Xorg cursor:
ln: /usr/share/fonts/X11/misc/cursor.pcf: No such file or directory
info firsttime:mount_ro:time=17230:Mounting root RO
[ 17.295520] elevator: type
[ 17.295525] not found
[ 17.300746] elevator: switch to
[ 17.300750] failed
[ 17.314506] elevator: type
[ 17.314511] not found
[ 17.319712] elevator: switch to
[ 17.319716] failed
[ 17.333481] elevator: type
[ 17.333486] not found
[ 17.338687] elevator: switch to
[ 17.338691] failed
info system:start:time=17340:
/etc/rcS.d/S50diags: line 500: f_proto: not found
info hardware:no_wan::WiFi only device. No WAN found
info system:configlatform=wario,board=muscat,rev=3,pr oto=N,wifi=Y,wan=N:
info system:done:time=17760:
ls: /lib/firmware/cyttsp4/muscat*.bin: No such file or directory
info cyttsp4:update:cyttsp4 fw ver=00D3 file version=.bin:
/etc/upstart/cyttsp: line 49: syntax error: 0x.bin
crit modules:modprobe_failed:failed to load touch module:
/etc/rcS.d/S50diags: line 500: iptables-restore: not found
/opt/ar6k/include/dbglog.h.save: No such file or directory
info userstore:run:time=19060,action=start:
info userstore:start:found_bootup_flag:Found BOOTUP flag file
dosfsck 2.11 (12 Mar 2005)
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Checking we can access the last sector of the filesystem
Boot sector contents:
System ID "mkdosfs"
Media byte 0xf8 (hard disk)
512 bytes per logical sector
8192 bytes per cluster
2134 reserved sectors
First FAT starts at byte 1092608 (sector 2134)
2 FATs, 32 bit entries
1594880 bytes per FAT (= 3115 sectors)
Root directory start at cluster 2 (arbitrary size)
Data area starts at byte 4282368 (sector 8364)
398580 data clusters (3265167360 bytes)
32 sectors/track, 64 heads
0 hidden sectors
6385648 sectors total
Checking for unused clusters.
Checking free cluster summary.
/dev/loop/0: 1519 files, 110950/398580 clusters
Wifi cal bin symbolic link AR6003_calfile.bin is already created
system: I mntroot:def:Making root filesystem writeable
ln: /usr/local/sbin/dropbear: File exists
ln: /usr/local/sbin/dropbearkey: File exists
/etc/rcS.d/S50diags: line 13: /usr/local/sbin/dropbearkey: not found
system: I mntroot:def:Making root filesystem read-only
/etc/rcS.d/S50diags: line 13: /usr/local/sbin/dropbear: not found
mounting waveform filesystem
waveform filesystem already mounted
info display:update:Checking '/opt/eink/images/R094_ED060KD1C2' for overrides:
umounting waveform filesystem
drawing default
cannot find image: /opt/amazon/low_level_screens/splash.png
info display:started:time=21540:
/etc/upstart/battery-diags: line 91: f_proto: not found
info battery:charged:cap=94,mV=4095,mAH=1384:
USER=root
prevlevel=N
OLDPWD=/
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/dev
VERBOSE=no
LD_LIBRARY_PATH=/usr/lib/tts/speech/components/common/:/usr/lib/tts
/etc/rcS.d/S50diags: line 13: kb: not found
diags : /opt/factory/rootfs_md5_list not found.
Change list is: [291999]
Sending: mkdir -p /mnt/base-us/diagnostic_logs/
PostMode len = 6 of 16
Ignoring PostMode
DiscoveryObjectImpl:getDeviceDiagsInfo FOUND: MUSCAT_WFO: [067] [103] with 06703091630701WD
Device found: MUSCAT_WFO [067] [103]
GlobalHalImpl: found DeviceType: 0x67
found: cyttsp4_i2c
found: cyttsp4_core
found: cyttsp4_mt_b
[ 21.756943] cyttsp4_device_access_init: Registering device access device for core_id: main_ttsp_core
[ 21.767079] cyttsp4_device_access cyttsp4_device_access.main_ttsp_core: cyttsp4_device_access_probe
[ 21.777069] cyttsp4_device_access_init: Cypress TTSP Device Access (Built 20121109) rc=0
Input driver version is 1.0.1
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "max77696-onkey"
Supported events:
Input driver version is 1.0.1
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "cyttsp4_mt"
Supported events:
failed to open /dev/input/event2
failed to open /dev/input/event3
failed to open /dev/input/event4
failed to open /dev/input/event5
failed to open /dev/input/event6
failed to open /dev/input/event7
Ignoring PostMode
diag>diag>open_device m_vsInfo.xres: 1072
get_m_test_xmlFile wfo.xml
device type = 0x67
PCBID: 06703091630701WD
TCP_IP_Server_Handler:start_USBnet Enabling USB net
Cannot open xmlFile /mnt/base-us/USBnet.xml
NOT Found NFS path
[ 21.995401] unregistered gadget driver 'g_file_storage'
ERROR: Module g_serial does not exist in /proc/modules
[ 22.047870] usb0: MAC ee:59:00:00:00:15
[ 22.051713] usb0: HOST MAC ee:29:00:00:00:15
[ 22.072479] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (ECM)
[ 22.095679] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 22.102314] g_ether gadget: g_ether ready
[ 22.109285] fsl-usb2-udc: bind to driver g_ether
system: I mntroot:def:Making root filesystem writeable
[ 22.163776] EXT3-fs (mmcblk0p2): using internal journal
[ 22.759790] KERNEL: I pmic:charger chgina::charger disconnected
sock_init 1888
[ 207.076628] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VEE_fault,1,
[ 207.085597] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VNEG_fault,1,
[ 207.094671] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VDD_fault,1,
[ 207.103650] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [1a]
[ 207.110890] Regulator Fault Occurred! Retrying powerup...
[ 207.164205] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VEE_fault,1,
[ 207.173193] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VNEG_fault,1,
[ 207.182258] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VDD_fault,1,
[ 207.191235] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [1a]
[ 207.198475] Regulator Fault Occurred! Retrying powerup...
[ 207.244126] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VEE_fault,1,
[ 207.253113] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VNEG_fault,1,
[ 207.262179] kernel: kernel_metric_high_priority,947815488,counter,kern el,max77696-epd,VDD_fault,1,
[ 207.271155] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [1a]
[ 207.278391] Regulator Fault Occurred! Retrying powerup...
[ 207.305895] kernel: kernel_metric_high_priority,947815488,counter,kern el,imx_epdc_fb,powerup_timeout,1,
[ 207.315926] imx_epdc_fb imx_epdc_fb: Powerup timeout!!
[ 207.321068] ------------[ cut here ]------------
[ 207.325698] WARNING: at /home/jenkins-official/src/wario/b5-diags/OFFICIAL/kernel/linux-3.0.35/dist/drivers/regulator/core.c:1422 _regulator_disable+0x40/0x124()
[ 207.340148] unbalanced disables for max77696-display
[ 207.345115] Modules linked in: g_ether cyttsp4_device_access cyttsp4_mt_b cyttsp4_core cyttsp4_i2c mwan ppp_async ppp_generic slhc crc_ccitt fuse arcotg_udc mxc_epdc_fb mxc_epdc_eink(P) [last unloaded: g_file_storage]
[ 207.364451] Backtrace:
[ 207.366933] [<c0146ee0>] (dump_backtrace+0x0/0x104) from [<c0431184>] (dump_stack+0x18/0x1c)
[ 207.375508] r6:c02e2a14 r5:00000009 r4:de367e98 r3:00000000
[ 207.381059] [<c043116c>] (dump_stack+0x0/0x1c) from [<c016feb4>] (warn_slowpath_common+0x54/0x6c)
[ 207.390106] [<c016fe60>] (warn_slowpath_common+0x0/0x6c) from [<c016ff04>] (warn_slowpath_fmt+0x38/0x40)
[ 207.399600] r8:00000002 r7:00000000 r6:de367edc r5:de1c0c40 r4:de1c0c00
[ 207.406189] r3:00000009
[ 207.408646] [<c016fecc>] (warn_slowpath_fmt+0x0/0x40) from [<c02e2a14>] (_regulator_disable+0x40/0x124)
[ 207.418206] r3:c04c57bb r2:c04e046e
[ 207.421632] [<c02e29d4>] (_regulator_disable+0x0/0x124) from [<c02e2b30>] (regulator_disable+0x38/0x7c)
[ 207.431192] r7:00000000 r6:de1c0c00 r5:de1c0c40 r4:de367edc
[ 207.436770] [<c02e2af8>] (regulator_disable+0x0/0x7c) from [<bf00ada8>] (mxc_epdc_irq_handler+0x774/0x123c [mxc_epdc_fb])
[ 207.447862] r7:00000000 r6:de014574 r5:00000000 r4:00000002
[ 207.453412] [<bf00a634>] (mxc_epdc_irq_handler+0x0/0x123c [mxc_epdc_fb]) from [<c01a4c88>] (irq_thread+0x130/0x1e8)
[ 207.464011] [<c01a4b58>] (irq_thread+0x0/0x1e8) from [<c018acc0>] (kthread+0x90/0x98)
[ 207.471856] r9:00000000 r8:00000000 r7:00000013 r6:c01a4b58 r5:de16e000
[ 207.478446] r4:de041a64
[ 207.480907] [<c018ac30>] (kthread+0x0/0x98) from [<c0173848>] (do_exit+0x0/0x6b8)
[ 207.488555] r6:c0173848 r5:c018ac30 r4:de041a64
[ 207.493029] ---[ end trace 57e5b522f613c792 ]---
[ 212.045563] imx_epdc_fb imx_epdc_fb: Timed out waiting for update completion. Marker : 4
[ 279.106164] imx_epdc_fb imx_epdc_fb: Timed out waiting for update completion. Marker : 5

please who can help me? (ty very all)