View Single Post
Old 02-10-2020, 02:10 PM   #20
Quoth
Still reading
Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.Quoth ought to be getting tired of karma fortunes by now.
 
Quoth's Avatar
 
Posts: 14,191
Karma: 105212035
Join Date: Jun 2017
Location: Ireland
Device: All 4 Kinds: epub eink, Kindle, android eink, NxtPaper
@ j.p.s.
Do I just connect up the TX, RX and OV to the three pads and it works?
Any link here?
3.3V or 5V?

As an aside when making a parallel port to JTAG bit banged adaptor, I realised the ANCIENT original LS TTL works on the 0 to 3.3V logic in, and most gates only have about 2.75V as logic 1 out, so I used a suitable LS TTL as a level shifter, as the Centronics Parallel port was about 4.8V for a logic 1. I was then able to change the boot loader on a Samsung SC6400 evaluation kit to swap the Windows CE for ARM Debian (11 years ago!)

But I have various RS232 and some USB to "TTL" serial adaptors.

Seems mad there is no way to set the date on the GUI (though maybe the wiki instructions don't apply to B009 as the 411 and 611 only work direct in the settings page, without any search box, and it's ignoring date & time on the 3G, though can access the Amazon Kindle Shop.

What is Kterm?

Last edited by Quoth; 02-10-2020 at 02:13 PM.
Quoth is offline   Reply With Quote