View Single Post
Old 01-05-2020, 11:31 PM   #5
temp0rary
Member
temp0rary began at the beginning.
 
Posts: 11
Karma: 10
Join Date: Sep 2018
Device: kindle
Quote:
Originally Posted by Hrod View Post
Updating your Boox is straightforward

Download the firmware corresponding to your model:
https://www.boox.com/downloads/#note-series

Instructions from http://bbs.onyx-international.com/t/topic/26

Before update your device, please ensure enough power (over 30%), if uncertainty, connect the power supply to avoid running out of power led to the update can not enter the system:
  1. Downloaded update file update.zip into the root directory of built-in storage or the root directory of MicroSD card, without decompression;
  2. Go to Settings - About - system update , choose “Check update from local storage”;
  3. The system detects the update package, the process need about 3-5 minutes ;If you can not detect the update package, please check the downloaded file package is complete, try another new MicroSD card or save the package in built-in storage and try again;
  4. After updating the device will automatically reboot (for the first time into the system a little longer, please be patient), you can enter the settings - About - devices check the version number;
  5. Remove the memory card upgrade package, the upgrade is complete.
Thanks. I don't have an sd card. I can send it with usb.. Where is the root directory? In the storage one? Does it remove the books and soundbooks i have and notes? Or just update without removing anything? Like it should. Thanks
temp0rary is offline   Reply With Quote