View Single Post
Old 12-14-2019, 08:41 PM   #1
mecnal
Junior Member
mecnal began at the beginning.
 
Posts: 2
Karma: 10
Join Date: Dec 2019
Device: Kindle PW2
Unbricking PW2 - erased eMMC

Hi All,

I'm trying to unbrick a PW2 (B0D4 - WiFi 2GB) with an erased eMMC.

I believe the kindle was stuck in a boot loop after installing an OTA update. USB drive was not showing.

Boot Log:
Code:
U-Boot 2009.08-lab126 (Jan 17 2019 - 01:39:57)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   46 C, calibration data 0x55c4e65f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO 2GB
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 02E2201XXXXX
S/N: B0D422XXXX
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 57 ms
Battery voltage: 3998 mV

Hit any key to stop autoboot:  0 
Wrong Image Format for bootm command
ERROR: can't get kernel image!
uboot >
Would someone be able to share the kernel/partition images. All links I can find are dead.

Thanks
mecnal is offline   Reply With Quote