Quote:
Originally Posted by Emulatore
My friend have a PW2 stop on tree, so i used serial to figure out if can be unbricked, when i try to follow the guide for this guide
https://gist.github.com/ramast/58633...on-update-file
to enter fastboot i got follow output:
Code:
In: serial
Out: serial
Err: serial
POST done in 0 ms
Battery voltage: 3993 mV
running cmd: fastboot
Entering fastboot mode...
USB speed: HIGH
Connected to USB host!
USB speed: HIGH
Connected to USB host!
mmc write failed
Error! Couldn't write NV variables. (-18)
Warning: fail to get ext csd for MMC!
idme_update_var ERROR: couldn't switch back to user partition
and when i try to go in diag mode
Code:
setting 'bootmode' to 'diags'...
setvar:bootmode diags FAILED (remote: update error)
finished. total time: 0.009s
is it mean the mmc is failed? is it going to be a screen to sell ?
thanks for any reply or  |
An eMMC costs under $10 ... you could replace it instead.
(Source for both statements:
https://www.mobileread.com/forums/sh...d.php?t=271750)
But replacement requires a hot air station, and beware, it's not trivial. It's better to get the spare part and let a friend with SMD reworking experience do it.