|
Does this work on the inkpad 3?
Go to the Pocketbook International website (here) and download the ZIP file for the v4.4 firmware.
Open the ZIP file and find the BIN file.
Copy that BIN file to the root folder of your InkPad.
Unplug the InkPad from the USB cable and press and hold the power button until it turns off.
To install the firmware, press and hold both of the page turn buttons. While holding them, press the power button to turn on the InkPad.
You'll know the process started if you see small lines of text in the upper left corner, and you'll know the process worked if, after about 3 (ish) minutes of small lines of text appearing on the screen, the InkPad reboots and the screen looks something like the photos I posted above.
|