Quote:
Originally Posted by NiLuJe
Check dmesg on both sides, and try unplugging/replugging it.
|
Thank You!
dmesg on ubuntu PC side is mute when I unplug / replug
dmesg via serial root on PW3 side is as follows after unplug / replug:
[ 5296.116279] otg udc vbus rising wakeup
[ 5296.120745] try_wake_up_udc: udc out low power mode
respectfully.
UPDATE: Tried to explicitly enable USB via RECOVERY "Export" command and via DIAGS "USB EXPORT" but must be doing something wrong, PC still will not detect the PW3 via USBMS. I tried detecting USBMS on Ubuntu, Win7 Pro, and OS X but no luck. After commanding "Export" on recovery menu I saw the following during the boot sequence:
USB0: MAC xx:xx:xx:xx:xx:xx
USB0: HOST MAC xx:xx:xx:xx:xx:xx
g_ether gadget
very respectfully.