With the screen being pretty expensive I want to make sure it really is the problem before I buy a replacement.
I've never used a Kobo Glo before but I figured out the serial port and got a boot log off it. (I was very surprised there was no root password, is that normal?)
I'm pretty sure the screen is faulty but could someone with more experience check the boot log below and give me some advice?
Quote:
[root@(none) /]# reboot
[root@(none) /]# umount: can't remount /dev/mmcblk0p3 read-only
umount: none busy - remounted read-only
umount: none busy - remounted read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
Restarting system.
msp430_write: write reg error : Reg 0x90 = 0xff00
à
U-Boot 2009.08-dirty-svn ( 8? 29 2012 - 11:15:18)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 200000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
Board: MX50 RDP board
Boot Reason: [POR]
Boot Device: SD
I2C: ready
DRAM: 256 MB
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1, FSL_ESDHC: 2
In: serial
Out: serial
Err: serial
[_get_sd_number] g_sd_number:0
MMC read: dev # 0, block # 1023, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 1024, count 1 partition # 0 ...
1 blocks read: OK
no ramdisk env ,default rd->70d00000
MMC read: dev # 0, block # 8191, count 1 partition # 0 ...
1 blocks read: OK
no ramdisk image signature ! skip load initrd !
MMC read: dev # 0, block # 12287, count 1 partition # 0 ...
1 blocks read: OK
no ramdisk image signature ! skip load initrd !
ram p=70000000,size=268435456
MMC read: dev # 0, block # 18431, count 1 partition # 0 ...
1 blocks read: OK
no "logo" bin header
MMC read: dev # 0, block # 14335, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 14336, count 2205 partition # 0 ...
2205 blocks read: OK
Kernel RAM visiable size=254M->254M
init TPS65185 power ...
Hit any key to stop autoboot: 0
MMC read: dev # 0, block # 2047, count 1 partition # 0 ...
1 blocks read: OK
no kernel image signature !
MMC read: dev # 0, block # 2048, count 8192 partition # 0 ...
8192 blocks read: OK
## Booting kernel from Legacy Image at 70800000 ...
Image Name: r5535_#604 Oct 15 15:37:28
Created: 2012-10-15 7:37:32 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1925456 Bytes = 1.8 MB
Load Address: 70008000
Entry Point: 70008000
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
drivers/video/mxc/lk_tps65185.c(456):tps65185_int_func fault on VCOM detected !
drivers/video/mxc/lk_tps65185.c(456):tps65185_int_func fault on VCOM detected !
[zForce_ir_touch_recv_data-176] command BootComplete (0)...
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=0!
1+0 records in
1+0 records out
512 bytes (512B) copied, 0.000226 seconds, 2.2MB/s
cannot open /dev/null
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=1!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=2!
dosfsck 3.0.6, 04 Oct 2009, FAT32, LFN
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=3!
/dev/mmcblk0p3: 34 files, 1186/348630 clusters
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
/etc/init.d/rcS: line 121: /usr/local/Kobo/hindenburg: not found
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=4!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=5!
(none) login: drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=6!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=7!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=8!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=9!
[PROGRESS_BAR-2857] No progess ...
drivers/video/mxc/lk_tps65185.c(456):tps65185_int_func fault on VCOM detected !
drivers/video/mxc/lk_tps65185.c(456):tps65185_int_func fault on VCOM detected !
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=0!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=1!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=2!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=3!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=4!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=5!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=6!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=7!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=8!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=9!
mxc_epdc_fb mxc_epdc_fb: Flush updates timeout! ret = 0x0
Screen resolution is.. 758 x 1024
drivers/video/mxc/lk_tps65185.c(456):tps65185_int_func fault on VCOM detected !
drivers/video/mxc/lk_tps65185.c(456):tps65185_int_func fault on VCOM detected !
> ApplicationBase: loading locale: ":/translations/trans_it_IT"
sh: you need to specify whom to kill
sh: you need to specify whom to kill
sh: you need to specify whom to kill
sh: you need to specify whom to kill
getenv "/mnt/onboard/.kobo/KoboReader.sqlite"
sh: you need to specify whom to kill
> WebSyncScheduler: scheduleTimer: No need to schedule a sync
loadPlugin: loaded plugin for QFontEngine
Loading iType.. YES
> FTE Startup stage: 0. Language selection...
> MainWindowController: Pop: Trying to pop a controller that's not in the list. LanguageSelectionController(0x10fa498)
> FTE Startup stage: 1. Select setup type...
> FSCheckThread: dbMalformed: false fsCorrupted: false
static bool DictionaryParser::initialize(QString, QString) LANG: "en" TRANS: ""
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=0!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=1!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=2!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=3!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=4!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=5!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=6!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=7!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=8!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=9!
mxc_epdc_fb mxc_epdc_fb: Flush updates timeout! ret = 0x0
drivers/video/mxc/lk_tps65185.c(456):tps65185_int_func fault on VCOM detected !
drivers/video/mxc/lk_tps65185.c(456):tps65185_int_func fault on VCOM detected !
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=0!
loadPlugin: loaded plugin for QRasterPaintEngine
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=1!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=2!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=3!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=4!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=5!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=6!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=7!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=8!
drivers/video/mxc/lk_tps65185.c(1059):wait power on timeout lpcnt=9!
|