Quote:
Originally Posted by ReaLx3m
Niiice.
You could be right about the tape, and it being white(more reflective) doesnt help with the situation.
Just to be sure, wipe the shiny part in the inner edge of the bezel with a cotton cloth as some dust/debree could be causing that warning. You can also disable the warning in settings, going from memory it was named something like "detect water droplets" or similar.
Edit:
Also wipe the ridges on the bezel that go inside and near the ir leds.
|
Where
are the IR LED's? I was actually wondering about that since I've already taken the whole thing apart yet haven't seen/recognized them at all. The touch part just seems to work like magic when I slap the front bezel back on
As for the white tape, that's actually just covering the other sticky side of the double-sided tape which I removed when I stuck the front bezel back on. Thanks for the reminder about disabling the "water droplets detection" though, I'd forgotten about that
The front bezel actually is still sticking up around the corners despite the double-sided tape. I'm wondering if super glue would be a better solution although I'm a bit wary of such a "permanent" solution in case I need to open it up again.