Thank you @knc1.
Quote:
Originally Posted by knc1
If it is in Diags Mode, then it will be showing a menu on the screen.
|
It was. Now it is not as I have tried to explain above.
Quote:
Originally Posted by knc1
Please take a picture of what is on the screen (menu or something else) and attach to one of your posts.
|
Attached.
Quote:
Originally Posted by knc1
Why?
Because the "Diags" firmware varies depending on the price of tea in China.
It does not seem to have anything to do with what "Main" firmware version is installed.
|
If I can read the shadow underneath the screen correctly, the top two lines of the diags menu read as follows:
Code:
ICE - WARIO - WFO - 512 - Utilities
-------1.16.613.255799------
Quote:
Originally Posted by knc1
Note:
Some (all?) Diags firmware that includes the message you see ONLY puts the menu on the serial port, not the screen.
Some versions put it on both the screen and the serial port.
|
I have used the diags menu on the screen a couple of times before.
Quote:
Originally Posted by knc1
Note2:
You may have to just follow the directions (that is: use the serial port).
|
I hope we can be able to produce an easier solution.