|
I tried to warm up 030 resistor to remove it, I'm finding it extremely difficult, tried tweezers, tried a small screwdriver to pry off, tried my soldering iron. In the end I set my heat gun to 250 and tried to heat up the solder a lot. Still not really working.
So anyway I warmed it all up and thought i may as well try charger and see what happens.
I still get the same boot, it stops at the same point...the output tells me 46 degrees.....but now I have an orange charge light!
@Bembela What method did you use to remove the shunt?
|