MobileRead Forums - View Single Post

frostschutz · 03-29-2019, 12:57 PM

screw in picture looks like torx to me

display type should be on the cable (-2.02 + barcode in picture), but display type is printed on the backside, so you have to lift the latch on the connector and take the cable out to see

we just had another display repair thread https://www.mobileread.com/forums/sh...d.php?t=316058

not your device, but maybe some generic advice

good luck

PS: an elbow can break more than just the display, try to confirm that the device still runs fine otherwise (like does LED blink as it should when you reboot or whatever)

PPS: I see this has one more cable than H2O, maybe the touchscreen...? no idea if this is one unit with the display or separate.

03-29-2019, 12:57 PM	#2
frostschutz Linux User Posts: 2,282 Karma: 6123806 Join Date: Sep 2010 Location: Heidelberg, Germany Device: none	screw in picture looks like torx to me display type should be on the cable (-2.02 + barcode in picture), but display type is printed on the backside, so you have to lift the latch on the connector and take the cable out to see we just had another display repair thread https://www.mobileread.com/forums/sh...d.php?t=316058 not your device, but maybe some generic advice good luck PS: an elbow can break more than just the display, try to confirm that the device still runs fine otherwise (like does LED blink as it should when you reboot or whatever) PPS: I see this has one more cable than H2O, maybe the touchscreen...? no idea if this is one unit with the display or separate. Last edited by frostschutz; 03-29-2019 at 01:02 PM.