Quote:
Originally Posted by 557
I was able to remove the shields from my PW2 with a heat gun and some tweezers. The shields soaked up the heat nicely and quickly desoldered from the rest of the board. Just be careful not to bump any components while the board is hot or you could displace components and ruin everything.
Also the chip you labeled eMMC is the SoC. I think the eMMC is a SanDisk chip, not a Freescale chip
|
Thanks for the heat shield tip, I will know for next time, actually i still have some partial heat shields left so maybe I will try it.
I was expecting a Sandisk chip but there's isn't one under any of the shields so I thought probably this one.....I'll post a photo of the board so all the chips are visible.