MobileRead Forums - View Single Post

Kus · 02-05-2019, 02:15 PM

Not sure if it's a good idea to start a new thread because old one was closed so had to start a new one. It seems that I'm having problem getting into recovery mode in KT3, tried fastboot too but that too seems to be not working and file "uImage" sent through xy modem doesn't seem to be working since after execution of command "mmc write 0x80800000 0x208 0x2600" it responds with a failed message like this

MMC write: dev # 0, block # 520, count 9728... Card did not respond to voltage select!
0 blocks write in 2 msec: ERROR

I was using uImage file from 'update_KT3_5.8.0_initial.bin'
Help please

02-05-2019, 02:15 PM	#1
Kus Member Posts: 11 Karma: 10 Join Date: Sep 2018 Device: KT3	Kt3 bootloop continues... Help Not sure if it's a good idea to start a new thread because old one was closed so had to start a new one. It seems that I'm having problem getting into recovery mode in KT3, tried fastboot too but that too seems to be not working and file "uImage" sent through xy modem doesn't seem to be working since after execution of command "mmc write 0x80800000 0x208 0x2600" it responds with a failed message like this MMC write: dev # 0, block # 520, count 9728... Card did not respond to voltage select! 0 blocks write in 2 msec: ERROR I was using uImage file from 'update_KT3_5.8.0_initial.bin' Help please