I am stuck...how do I get this to fastboot?
In Maxx's thread knc1 asked the question I am asking myself...how do i get it into fastboot mode?
https://www.mobileread.com/forums/sh...61&postcount=9
In his case:
"I connected the serial port and startet Putty. At first i got a black screen without information. After pressing Enter i will get the "uboot >" on screen.
with "bist fastboot" i get into the fastboot mode."
However I am not seeing the same behaviour, mine attempts boot spits out the below and then nothing, pressing enter does not return anything from the cli.
If I disconnect the power and reconnect power it issues the below on the serial again.
Quote:
U-Boot 2009.08-lab126 (Jan 08 2013 - 21:47:48)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Unknown
Boot Reason: [POR]
Boot Device: MMC
Board Id:
S/N:
Invalid board id! Can't determine system type for RAM init.. bailing!
DRAM: 0 kB
Using default environment
|