|
Zealot
Posts: 106
Karma: 10
Join Date: Dec 2018
Location: Sydney, Australia
Device: Kindle Paperwhite 2 WiFi 4Gb 2013 (s/n 9017..)
|
Thanks for your reply 
Quote:
Originally Posted by knc1
Earlier it looks like you have a partial system image.
How did you transfer the image you show running to the main partition?
|
All I've done so far is copy the Jailbreak files onto the kindle via USB, I haven't actually executed them yet.
Quote:
Originally Posted by knc1
Capture the serial port output again, this time with the USB cord unplugged.  |
This is a boot sequence without the USB to PC cable plugged in:
Code:
U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 37 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: 9017<the_rest_removed>
I2C: ready
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3999 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2593852 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.098451] No Legacy reboot reason code to print
[ 0.278885] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.282747]
[ 0.282751] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[ 0.295200]
[ 0.295204] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[ 0.304086]
[ 0.304089] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[ 0.312507]
[ 0.312509] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.323288]
[ 0.323291] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.336619]
[ 0.336622] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.346585]
[ 0.346588] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.360064]
[ 0.360067] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.369953]
[ 0.369955] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 6688752
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.75:49.1:
info milestone:6.79:49.2:
info milestone:6.82:49.3:
info milestone:6.86:49.4:
info milestone:6.89:49.5:
info sytem:mounted_tmpfs::
info milestone:6.96:sy50:
info system:start:time=6990:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.14:sy51:
lipc-send-event[808]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[808]: C def:dbusi::Failed to init dbus
lipc-send-event[808]: E def:open::Failed to open LIPC
lipc-send-event[808]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[807]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[807]: C def:dbusi::Failed to init dbus
lipc-send-event[807]: E def:open::Failed to open LIPC
lipc-send-event[807]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:8.03:sy99:
info system:done:time=8060:
crond[821]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (819) terminated with status 2
init.exe: sshÿ main process endediniü.exe: recevent pre-start proinfo system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.80:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:9.04:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.14:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.20:fs25:
info milestone:9.23:vi00:
Welcome to Kindle!
kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.35:vi99:
info display:started:time=11360:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11580,action=start:
info battery:charged:cap=73,mV=3934,mAH=1070:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:13.47:fs50:
info milestone:13.51:fs90:
info milestone:13.55:fs99:
info milestone:13.61:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.76:xx00:
info X:load:time=14920:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:16.71:xx50:
info X:starting:time=16770:
info milestone:20.74:xx99:
info X:started:time=20750:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:22.07:pi00:
info milestone:22.28:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:24.31:fr00:
info milestone:24.50:fr50:
info milestone:24.54:fr51:
info framework:starting:time=26340:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=1,max=3:starting lab126_gui:
info milestone:32.87:pi00:
info milestone:33.05:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:34.91:fr00:
info milestone:35.06:fr50:
info milestone:35.10:fr51:
info framework:starting:time=36440:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=2,max=3:starting lab126_gui:
info milestone:40.54:pi00:
info milestone:40.72:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:42.67:fr00:
info milestone:42.79:fr50:
info milestone:42.81:fr51:
info framework:starting:time=44130:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
info monitor:writing_file:file=/var/local/upstart/lab126_gui.restarts:
crit lab126_gui:restarts=3,max=3,reboots=1:rebooting system:
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=5290,timeout_ms=45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=61090,action=stop:
info userstore:filesystem sync done::
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4510,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
[ 65.657365] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[ 65.663425] Restarting system.
U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 41 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: S/N: 9017<the_rest_removed>
I2C: ready
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3920 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2593852 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.098472]
[ 0.272401] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.276481]
[ 0.276485] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[ 0.289019]
[ 0.289023] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[ 0.297868]
[ 0.297871] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[ 0.306198]
[ 0.306201] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.317032]
[ 0.317035] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.331367]
[ 0.331370] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.343500]
[ 0.343503] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.353896]
[ 0.353898] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.363786]
[ 0.363789] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 6688752
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.72:49.1:
info milestone:6.76:49.2:
info milestone:6.79:49.3:
info milestone:6.83:49.4:
info milestone:6.86:49.5:
info sytem:mounted_tmpfs::
info milestone:6.93:sy50:
info system:start:time=6960:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.11:sy51:
lipc-send-event[806]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[807]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[807]: C def:dbusi::Failed to init dbus
lipc-send-event[807]: E def:open::Failed to open LIPC
lipc-send-event[807]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[806]: C def:dbusi::Failed to init dbus
lipc-send-event[806]: E def:open::Failed to open LIPC
lipc-send-event[806]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:8.01:sy99:
info system:done:time=8039:
init.exe: sshd main process (826) terminated with status 2
init.exe: sshd main process ended, respawning
crond[828]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (831) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.78:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:9.02:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.13:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.18:fs25:
info milestone:9.21:vi00:
Welcome to Kindle!
kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.30:vi99:
info display:started:time=11320:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11530,action=start:
info userstore:found_shutdown_flag::Found SHUTDOWN flag file
info battery:charged:cap=77,mV=3913,mAH=1069:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:12.75:fs50:
info milestone:12.79:fs90:
info milestone:12.84:fs99:
info milestone:12.90:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:13.92:xx00:
info X:load:time=14110:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:15.99:xx50:
info X:starting:time=16059:
info milestone:20.10:xx99:
info X:started:time=20150:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:21.88:pi00:
info milestone:22.12:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:24.16:fr00:
info milestone:24.34:fr50:
info milestone:24.37:fr51:
info framework:starting:time=26110:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=1,max=3:starting lab126_gui:
info milestone:32.98:pi00:
info milestone:33.16:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:35.07:fr00:
info milestone:35.19:fr50:
info milestone:35.23:fr51:
info framework:starting:time=36560:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=2,max=3:starting lab126_gui:
info milestone:40.63:pi00:
info milestone:40.81:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:42.76:fr00:
info milestone:42.89:fr50:
info milestone:42.93:fr51:
info framework:starting:time=44220:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
info monitor:writing_file:file=/var/local/upstart/lab126_gui.restarts:
crit lab126_gui:restarts=3,max=3,reboots=2:rebooting system:
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=4890,timeout_ms=45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=59670,action=stop:
info userstore:filesystem sync done::
info userstore:found_bootup_flag::Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4789,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
[ 64.554185] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[ 64.560245] Restarting system.
U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 41 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: S/N: 9017<the_rest_removed>
I2C: ready
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3916 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2593852 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.098470]
[ 0.272462] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.276543]
[ 0.276546] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[ 0.289096]
[ 0.289099] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[ 0.297943]
[ 0.297946] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[ 0.306275]
[ 0.306277] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.317114]
[ 0.317117] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.331462]
[ 0.331464] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.343607]
[ 0.343610] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.354021]
[ 0.354024] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.363923]
[ 0.363925] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 6688752
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.64:49.1:
info milestone:6.68:49.2:
info milestone:6.71:49.3:
info milestone:6.75:49.4:
info milestone:6.78:49.5:
info sytem:mounted_tmpfs::
info milestone:6.85:sy50:
info system:start:time=6880:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.03:sy51:
lipc-send-event[799]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[799]: C def:dbusi::Failed to init dbus
lipc-send-event[799]: E def:open::Failed to open LIPC
lipc-send-event[799]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[800]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[800]: C def:dbusi::Failed to init dbus
lipc-send-event[800]: E def:open::Failed to open LIPC
lipc-send-event[800]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:7.93:sy99:
info system:done:time=7960:
init.exe: sshd main process (811) terminated with status 2
init.exe: sshd main process ended, respawning
crond[813]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (816) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.70:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.94:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.04:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.09:fs25:
info milestone:9.12:vi00:
Welcome to Kindle!
kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.22:vi99:
info display:started:time=11240:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11440,action=start:
info userstore:found_shutdown_flag::Found SHUTDOWN flag file
info battery:charged:cap=76,mV=3911,mAH=1067:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:12.64:fs50:
info milestone:12.68:fs90:
info milestone:12.73:fs99:
info milestone:12.79:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.14:xx00:
info X:load:time=14290:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:15.87:xx50:
info X:starting:time=15940:
info milestone:20.84:xx99:
info X:started:time=20880:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
crit lab126_gui:reboots=2,max=2:shutting down and showing customer service page:
info shutdown:begin:level=0,halt=1,special=cust_service:
info shutdown:closing password dialog::
info log_var_local_folder_sizes:printing varlocal folder sizes:254.0K /var/local/appreg.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:0 /var/local/appregdbupgrade:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.0K /var/local/archive:
info log_var_local_folder_sizes:printing varlocal folder sizes:70.0K /var/local/blanket:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/cc:
info log_var_local_folder_sizes:printing varlocal folder sizes:169.0K /var/local/cc.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:829.0K /var/local/certman:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K /var/local/cvm:
info log_var_local_folder_sizes:printing varlocal folder sizes:41.0K /var/local/dcm.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:111.0K /var/local/firstReboot.gz:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K /var/local/font:
info log_var_local_folder_sizes:printing varlocal folder sizes:10.0K /var/local/grok.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/guid:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/halt_reason:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.2M /var/local/java:
info log_var_local_folder_sizes:printing varlocal folder sizes:800.0K /var/local/log:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/logLevel.conf:
info log_var_local_folder_sizes:printing varlocal folder sizes:63.0K /var/local/merchant:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.8M /var/local/mesquite:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/metrics_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:918.0K /var/local/odot_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:13.0K /var/local/odot_outbox_discard:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/odotlite_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:715.0K /var/local/printklogs:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/recent_searches.json:
info log_var_local_folder_sizes:printing varlocal folder sizes:200.0K /var/local/reg:
info log_var_local_folder_sizes:printing varlocal folder sizes:86.0K /var/local/system:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K /var/local/tmd:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K /var/local/todo:
info log_var_local_folder_sizes:printing varlocal folder sizes:5.0K /var/local/token:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/upstart:
info log_var_local_folder_sizes:printing varlocal folder sizes:60.0K /var/local/wsync.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.0K /var/local/xorg.conf:
info log_df_h:printing df -h:Filesystem Size Used Available Use% Mounted on:
info log_df_h:printing df -h:/dev/root 348.1M 292.9M 48.2M 86% /:
info log_df_h:printing df -h:tmpfs 124.7M 100.0K 124.6M 0% /dev:
info log_df_h:printing df -h:tmpfs 124.7M 0 124.7M 0% /dev/shm:
info log_df_h:printing df -h:tmpfs 32.0M 352.0K 31.7M 1% /var:
info log_df_h:printing df -h:/dev/loop/2 2.5M 2.5M 0 100% /usr/share/X11/xkb:
info log_df_h:printing df -h:/dev/loop/3 103.1M 103.1M 0 100% /usr/java/lib/fonts:
info log_df_h:printing df -h:/dev/loop/4 1.4M 1.4M 0 100% /etc/kdb.src:
info log_df_h:printing df -h:/dev/loop/5 9.1M 9.1M 0 100% /usr/lib/locale:
info log_df_h:printing df -h:/dev/loop/6 22.2M 22.2M 0 100% /usr/share/keyboard:
info log_df_h:printing df -h:/dev/mmcblk0p3 62.0M 14.6M 44.2M 25% /var/local:
info log_df_h:printing df -h:/dev/loop/0 3.2G 115.5M 3.1G 4% /mnt/base-us:
info log_df_h:printing df -h:fsp 3.2G 115.5M 3.1G 4% /mnt/us:
info log_version_txt:printing /etc/version.txt:System Software Version: 002-juno_60102_pinot_wario-254770:
info log_version_txt:printing /etc/version.txt:Wed Dec 10 13:54:22 PST 2014:
info log_version_txt:printing /etc/version.txt:com.lab126.eink.pinot.os:
crit shutdown:Entering repair screen:uploading logs ...:
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:cust_service
info shutdown_showimage:screen:waiting for cust_service screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=4500,timeout_ms=45000:
info shutdown:cust_service:starting:
info ss_cust_service:nothing to do for this shutdown mode:"cust_service":
info ss_cust_service:completed successfully::
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=34060,action=stop:
info userstore:filesystem sync done::
info userstore:found_bootup_flag::Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4760,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=0,halt=1:
[ 38.884261] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[ 38.890321] System halted.
Last edited by dom123dom; 12-31-2018 at 05:14 PM.
|