View Single Post
Old 10-16-2018, 10:46 AM   #2
pazos
cosiņeiro
pazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watchpazos is clearly one to watch
 
Posts: 102
Karma: 10628
Join Date: Apr 2014
Device: BQ Cervantes 4
First time Installation instructions

You'll need a sdcard.
  1. Install Developers firmware and enable telnet
  2. Download KOReader dependencies attached in this post
  3. Download KOReader from github
  4. Copy KOReader and ko-deps.tar.gz to the sd card
  5. Insert the SD card on your ereader and start a telnet connection.
  6. Uncompress/install KOReader and KOReader dependencies:

    Code:
    mv /mnt/sd/ko* /mnt/private
    cd /mnt/private
    tar -xvf ko-deps.tar.gz
    dpkg -i *.deb
    unzip koreader-cervantes*.zip

Congratulations, You are ready to start KOReader

You can run KOReader from telnet with
Code:
/mnt/private/koreader/koreader.sh
. This will stop the stock ereader while KOReader is running and return to it when KOReader exits.

If you are happy with KOReader and want to use it at boot you need to do;
Code:
cp /etc/rc.local /etc/rc.local.backup
cp /mnt/private/koreader/koreader-standalone.sh /etc/rc.local
.

New users: please download lastest dependencies. Others are left here for reference.
Attached Files
File Type: gz ko-deps.tar.gz (834.5 KB, 69 views)
File Type: gz ko-deps-latest.tar.gz (900.6 KB, 19 views)

Last edited by pazos; 02-15-2019 at 07:37 PM. Reason: support for usb mass storage in KOReader
pazos is offline   Reply With Quote