Quote:
Originally Posted by Derf
The Plastidip has held up fine, and I’ve been pretty rough with it. But I would say that 50% of my luck has to be pre-application prep, 30% is the application, and 20% is the brand of spray rubber.
Tips:
1) clean the surface with alcohol.
2) put the spray can in a pot of very warm water for a few minutes before spraying. It’s helps with atomization of the rubber.
3) the first coat should be a light coating, let it dry before the next coat.
4) subsequent coats should go on heavy.
5) the more costs the thicker the coating and the better. I did 5 costs.
It does pick up more lint/ stuff than smooth plastic. But it all brushes off easily enough. No you don’t have to do the front bezel, I only did the back cover.
-Edit-
I just noticed there is a small piece like a fingernail that was starting to lift up on the rear corner. My OCD got the best of me and I peeled the whole thing off in one piece. It is a perfect facsimile of the textured pattern on the back, including the Ramirez Kobo logo.
The upshot is my spray can should have at least another 20 or so jobs worth in it, considering how small the area is that I’m covering, and for me it’s readily available in several local stores so I can easily enough just spray on another application tonight.
|
Wouldn't it be better to just buy a case for it Heres quite a few on Amazon
https://www.amazon.com/s/ref=nb_sb_s...=32ZK65CZGVFDW
Here is the style I like...
https://www.amazon.com/gp/product/B0...CR0CNC5C&psc=1