MobileRead Forums - View Single Post - PRS-T1 Recovery mode & win10?

Sing Sing · 09-08-2018, 07:56 AM

Hi,

It only take a few mins.

Here's link for rupor-rescue, I think the one in the wiki is dead:
https://projects.mobileread.com/read...scue/20121208/

Briefly, what you do is:

Unpack it onto an SD card, and put it into the T1.

Boot the T1 and hold the HOME + MENU buttons until the progress bar stops.

Plug the T1 into your computer, and connect to it with PuTTY.

Press return and you'll see a login prompt. The username is 'root', no password.

Then you'll see a '#' prompt and you can enter your e2fsck commands.

Enter 'reboot' when you're done and it'll reboot itself, and hopefully the dictionary will be less troublesome.

09-08-2018, 07:56 AM	#5
Sing Sing Member Posts: 17 Karma: 196 Join Date: Aug 2018 Device: none	Hi, It only take a few mins. Here's link for rupor-rescue, I think the one in the wiki is dead: https://projects.mobileread.com/read...scue/20121208/ Briefly, what you do is: Unpack it onto an SD card, and put it into the T1. Boot the T1 and hold the HOME + MENU buttons until the progress bar stops. Plug the T1 into your computer, and connect to it with PuTTY. Press return and you'll see a login prompt. The username is 'root', no password. Then you'll see a '#' prompt and you can enter your e2fsck commands. Enter 'reboot' when you're done and it'll reboot itself, and hopefully the dictionary will be less troublesome.