View Single Post
Old 08-11-2018, 11:54 AM   #489
Cahir Mawr
Junior Member
Cahir Mawr began at the beginning.
 
Posts: 7
Karma: 10
Join Date: Aug 2018
Location: Mérida, México
Device: Kobo glo HD
I, cleaned the original SD card of my Glo HD and installed the image with zero success Do you have some advice to save it, or I should resign and buy a new one?

The Kobo is frozen on the standby screen, I have already pushed the reset button and the power button on every combination i´ve found on the forums or i could figure out, and every duration per button too (15 seconds, 30 seconds, a minute, and so on) pushed the power button and the lower corners repeatedly.
When I push the power button the red led turns on, then turns off and then the screen light turns on, sometimes it stayed on just for some seconds and sometimes it stayed on until I pushed the power button again, I have even used this to deplete the battery and charge it from zero. I´ve disconnected the battery and connected again, and nothing. The screen shows still on standby mode.

Could it be that the SD card is broken and it will not work even with partitions restored?
The USB image tool showed no problem at all on the SD card.

I´m out of ideas so any advice would be well received, thank you!!!
Cahir Mawr is offline