Quote:
Originally Posted by DNSB
As mentioned, the configuration file uses some of the settings for the brightness slider to trigger night mode. The defaults in the nightmode.ini file are 11% = toggleNightMode, 12% = enableNightMode, 13% = disableNightMode. Timeisart changed the 11% to 3% to toggle nightmode. Basically change the brightness level to 11% and wait for 7 or so seconds and nightmode will toggle. Ditto with 12% and 13% for the on/off. You might want to double check that you have the newest version from gtalusan's github page. The link today was kobo-nightmode_build13.zip.
I haven't tried this on an Clara since I don't own one but on an Aura One, you still need to force inverted mode in nightmode.ini, the toggles don't seem to work. At one point, this was explained as to how the Aura One handled the brightness levels due to ComfortLight Pro and the auto control. If I'm going to force inverted mode, I might as well just edit Kobo eReader.conf to add the invert setting there.
To install nightmode, copy the koboroot.tgz file from the installer directory in the .zip file to the .kobo directory, safe eject and watch your Clara restart and install. Once it is installed, you can edit the nightmode.ini file in the .kobo directory to change the options.
Code:
[FeatureSettings]
InvertScreen=true
|
So if i understand this right, installing night mode on KA1 means that i should connect kobo to my, PC, turn it on in ini file, use it, when i don't want to use night mode, i should again connect to pc to turn it off in ini file?
There is no other way?
or the hack works on 4.9.11311 firmware?