MobileRead Forums - View Single Post

Bean_There · 07-01-2018, 11:50 AM

Hi, I have recently updated my Kobo Glo HD to FW 4.8.11073 (Language English) from 3.19.5761. Previously I had been using the old version of the screensaver without issues for a couple of years.

I've tried installing the "experiment2" from post #223 and lettign it auto configure a couple of times. Then I've run through steps 4 & 5 numerous times and it still fails to work.

I've not yet seen the scanline on the screen, but it is writing the scan line info to the cfg file, and each time I uninstall and reinstall it writes the same scanline information.

Fbset file:
mode "1072x1448-45"
# D: 80.000 MHz, H: 65.681 kHz, V: 45.049 Hz
geometry 1072 1448 1088 3072 32
timings 12500 16 102 4 4 28 2
accel false
rgba 8/16,8/8,8/0,8/24
endmode

cfg file:
# Standby scanline autodetected Sun Jul 1 08:19:19 PDT 2018
# If this value does not work, remove it so it will be re-detected.
#
standby=1233:ffffffff*ff070707ff000000*ff2c2c2cfff fffff*ff929292ff000000*fffdfdfdffffffff*fff4f4f4ff 000000*ff5e5e5effffffff*ffd4d4d4ff767676ff252525ff 000000*ff1c1c1cff464646ffacacacffffffff*ffd4d4d4ff 767676ff252525ff000000*ff1c1c1cff464646ffacacacfff fffff*ffe3e3e3ffc2c2c2ffa0a0a0ff7f7f7fff5d5d5dff3b 3b3bff1a1a1aff000000ff6f6f6fffffffff*fffdfdfdff989 898ff3a3a3aff070707ff000000*ff1b1b1bff6e6e6effcaca caffffffff*fffcfcfcffdbdbdbffbbbbbbff9b9b9bff7a7a7 aff5a5a5aff393939ff191919ff000000ff5e5e5effffffff* ffeaeaeaffc8c8c8ffa6a6a6ff838383ff616161ff3f3f3fff 1c1c1cff000000ff5e5e5effffffff*ffa5a5a5ff444444ff0 a0a0aff000000*ff050505ff222222ff878787ffedededffff ffff*ffe8e8e8ff8d8d8dff333333ff0e0e0eff000000*ff13 1313ff4c4c4cff9f9f9ffff2f2f2fff7f7f7*ffffffff*

#
# Poweroff scanline autodetected [1] Sun Jul 1 08:21:32 PDT 2018
# If this value does not work, remove it so it will be re-detected.
#
poweroff=1233:ff000000*ff0b0b0bffffffff*ff424242ff 000000*ff1a1a1affffffff*fffefefeff000000*ff555555f fa7a7a7ffe7e7e7ffffffff*ffeeeeeeffb5b5b5ff656565ff 0a0a0aff000000*ff090909*ff000000*ff090909*ff020202 ff000000*ff090909*ff000000*ff2b2b2bff898989ffdadad affffffff*ffe3e3e3ffb9b9b9ff535353ff000000*ff15151 5ff373737ff595959ff7c7c7cff9e9e9effc0c0c0ffe3e3e3f fffffffffa1a1a1ff000000*ff474747ffafafaffff4f4f4ff ffffffffeaeaeaff6f6f6fff000000*ff2b2b2bff898989ffd adadaffffffff*ffe3e3e3ffb9b9b9ff535353ff000000*ff3 53535ff8b8b8bffd7d7d7ffffffff*ffddddddffb9b9b9ff81 8181ff2c2c2cff191919ffffffff*ff989898ff000000*ff55 5555ffa7a7a7ffe7e7e7ffffffff*ffeeeeeeffb5b5b5ff656 565ff0a0a0aff000000*ff090909*ff0b0b0bffffffff*ffa1 a1a1ff090909*ff0b0b0bffffffff*ffa1a1a1ff090909*ff0 00000*

Any pointers would be most helpful, thanks!

07-01-2018, 11:50 AM	#276
Bean_There Member Posts: 21 Karma: 10 Join Date: Mar 2016 Device: Kobo Glo HD	Hi, I have recently updated my Kobo Glo HD to FW 4.8.11073 (Language English) from 3.19.5761. Previously I had been using the old version of the screensaver without issues for a couple of years. I've tried installing the "experiment2" from post #223 and lettign it auto configure a couple of times. Then I've run through steps 4 & 5 numerous times and it still fails to work. I've not yet seen the scanline on the screen, but it is writing the scan line info to the cfg file, and each time I uninstall and reinstall it writes the same scanline information. Fbset file: mode "1072x1448-45" # D: 80.000 MHz, H: 65.681 kHz, V: 45.049 Hz geometry 1072 1448 1088 3072 32 timings 12500 16 102 4 4 28 2 accel false rgba 8/16,8/8,8/0,8/24 endmode cfg file: # Standby scanline autodetected Sun Jul 1 08:19:19 PDT 2018 # If this value does not work, remove it so it will be re-detected. # standby=1233:ffffffffff070707ff000000ff2c2c2cfff fffffff929292ff000000fffdfdfdfffffffffff4f4f4ff 000000ff5e5e5effffffffffd4d4d4ff767676ff252525ff 000000ff1c1c1cff464646ffacacacffffffffffd4d4d4ff 767676ff252525ff000000ff1c1c1cff464646ffacacacfff fffffffe3e3e3ffc2c2c2ffa0a0a0ff7f7f7fff5d5d5dff3b 3b3bff1a1a1aff000000ff6f6f6ffffffffffffdfdfdff989 898ff3a3a3aff070707ff000000ff1b1b1bff6e6e6effcaca cafffffffffffcfcfcffdbdbdbffbbbbbbff9b9b9bff7a7a7 aff5a5a5aff393939ff191919ff000000ff5e5e5effffffff* ffeaeaeaffc8c8c8ffa6a6a6ff838383ff616161ff3f3f3fff 1c1c1cff000000ff5e5e5effffffffffa5a5a5ff444444ff0 a0a0aff000000ff050505ff222222ff878787ffedededffff ffffffe8e8e8ff8d8d8dff333333ff0e0e0eff000000ff13 1313ff4c4c4cff9f9f9ffff2f2f2fff7f7f7ffffffff # # Poweroff scanline autodetected [1] Sun Jul 1 08:21:32 PDT 2018 # If this value does not work, remove it so it will be re-detected. # poweroff=1233:ff000000ff0b0b0bffffffffff424242ff 000000ff1a1a1afffffffffffefefeff000000ff555555f fa7a7a7ffe7e7e7ffffffffffeeeeeeffb5b5b5ff656565ff 0a0a0aff000000ff090909ff000000ff090909ff020202 ff000000ff090909ff000000ff2b2b2bff898989ffdadad affffffffffe3e3e3ffb9b9b9ff535353ff000000ff15151 5ff373737ff595959ff7c7c7cff9e9e9effc0c0c0ffe3e3e3f fffffffffa1a1a1ff000000ff474747ffafafaffff4f4f4ff ffffffffeaeaeaff6f6f6fff000000ff2b2b2bff898989ffd adadaffffffffffe3e3e3ffb9b9b9ff535353ff000000ff3 53535ff8b8b8bffd7d7d7ffffffffffddddddffb9b9b9ff81 8181ff2c2c2cff191919ffffffffff989898ff000000ff55 5555ffa7a7a7ffe7e7e7ffffffffffeeeeeeffb5b5b5ff656 565ff0a0a0aff000000ff090909ff0b0b0bffffffffffa1 a1a1ff090909ff0b0b0bffffffffffa1a1a1ff090909ff0 00000 Any pointers would be most helpful, thanks!