MobileRead Forums - View Single Post - Koreader running on Kobos (all of them, hopefully!)

gmw · 06-10-2018, 10:02 AM

As per my first post on the previous page, KOReader build 2018.06.02, with that minor config change.

After KOReader exit it's around 6-7 seconds (the first couple of those are still on the open book with no action apparent, presumably KOReader closing down, then about 4s of blink squares).

Power up is hard to get an exact start point, but there seems to be about 6s from first LED on until blinking squares, and then about 4s of those until up and running. So we're talking around 3s extra time over all ... very roughly.

06-10-2018, 10:02 AM	#2915
gmw cacoethes scribendi Posts: 5,818 Karma: 137770742 Join Date: Nov 2010 Location: Australia Device: Kobo Aura One & H2Ov2, Sony PRS-650	As per my first post on the previous page, KOReader build 2018.06.02, with that minor config change. After KOReader exit it's around 6-7 seconds (the first couple of those are still on the open book with no action apparent, presumably KOReader closing down, then about 4s of blink squares). Power up is hard to get an exact start point, but there seems to be about 6s from first LED on until blinking squares, and then about 4s of those until up and running. So we're talking around 3s extra time over all ... very roughly.