Thank you very much for the SD card image.
I have used the HDD Raw Copy software to transfer the image to the 2Gb SD card, but unfortunatly my kobo mini still don't want to turn on.
So I made a factory reset by holding the reset buton and have slided the power button, the LED became green / blue / green and turn off...then I heared a strange noise from the main square chip located on the PCB...I was affraid so I have press the reset button again and the noise have stopped.
I have check the SD card with Mini Tool Partition and I found that all look ok ( 10Mb Unallocated / rootfs 256MB / recoveryfs 256MB / KOBOeReader 1.3GB / Unallocated 16MB)
I do not have modified the SN and leave the one SN-N705000000000 because I don't know where is the box of my KOBO and the number sticked on the PCB is too long > (SF) 506 12A212AZ012345
I don't know what to do now, do you have any suggest ?
Thank you
Last edited by popof18; 04-24-2018 at 10:26 AM.
|