View Single Post
Old 12-05-2017, 12:52 PM   #3
huanglao
Junior Member
huanglao began at the beginning.
 
Posts: 1
Karma: 10
Join Date: Dec 2017
Device: nook glowlight 3
Quote:
Originally Posted by GeorgeYellow View Post
ou may need a WIFI access point, but it doesn't have to be connected to the Internet.

At the "Discover Today, Read Forever" (welcome) screen, touch the lower two corners of the screen at the same time - you should see the software version at the top.

If the version is "47.2.70 4.7.2.10"
- Choose "Let's Get Started"
- Pick any timezone
- Pick any wifi access point that lets you connect
- Stop at the "create account" screen
- Hold the left-down and right-up bottons and touch thrice quickly anywhere
- You should be in the "Diagnostic" applet

If the version is "47.2.103 4.8.1.19"
- Alternate touching the top-left and top-right corners of the screen
- Repeat this until you enter the "EasterEggActivity"
- Choose "Diagnistic"

- Choose "Android Development Setings" and enable "USB Debugging"

Now you can see the Nook in ADB, but it will be unauthorized.

Exit back (or reboot) to the main screen
Use the alternate top-left/top-right touch to enter EasterEgg or NookHWTest
As a side effect, ADB is now authorized.

At this point, you can root using the old BNRV510 tool, and/or sideload other
packages from the Nook GlowLight Plus / Zerolab site.

And for 47.2.113 / 4.8.2.8 ?

thanks
huanglao is offline   Reply With Quote