Quote:
Originally Posted by davidfor
Is the red LED flashing a few times and then going off? Does the screen light do anything?
|
No, In my case the red led turn solid on. without anyone activity in screen, ever white.
Quote:
Originally Posted by davidfor
The first thing to do is always to charge the device. Don't assume it is charged because it was the last time you used it. Give it a couple of hours, then turn it on. If it doesn't turn on, hold the power button down for 20 seconds to ensure the device is off, and then try turning it on.
|
I just charge 4, 5 hours several times.
Quote:
Originally Posted by davidfor
|
My first attempt, not work.
Quote:
Originally Posted by davidfor
You should also check the cable to the screen is still connected. Maybe it is turning on but can't display anything.
|
I work with electronics, One the first things I do, disconnect and reconnected flat cable.
Quote:
Originally Posted by davidfor
You can also try another SD card. The cause could be a failing card and putting the image on a new card would fix this. And you can take the opportunity to use a larger card.
|
Just tested with two cards, original 4gb, and other with 16gb (until I was able to increase the size of the data partition after recording the image as I saw some tutorials)
Many thanks for the help, my friend. I'm still trying to figure out solutions to this case. I do not know if other people have had the same symptoms (white screen with no activity, and red led fixed when on).
Thanks, Hugs,
JM