Quote:
Originally Posted by knc1
Code:
[ 13.167759] lost page write due to I/O error on mmcblk0p2
That is fatal, it is the file system of the 'Diags' system.
All you can do is replace the eMMC device.
There is a thread here from a person who replaced theirs (with a larger capacity version) but the process should be the same with your model and a stock capacity chip.
PS: There is at least three boot attempts in that log you posted, we only need one that shows the problem. |
Code:
Board Id: 027XXXXXXXXXXXXX
S/N: 901722XXXXXXXXXXX
If he can get the serial number and such off the mmc, is it worth trying to flash main back?
At least part of the mmc is working, right?
Do those errors with cmd resp code and the IO error definitely mean the magic smoke has come out of the chip?